Merge remote-tracking branch 'common/android-4.9' into hikey-4.9

Change-Id: Ib72a79566fc44bd93c2901b60daa16242ecb4053
2017-12-08 10:13:53 -08:00
parent ca272c3a4d f26d3c76d3
commit 71c123c37b
239 changed files with 8523 additions and 1753 deletions
@@ -436,6 +436,8 @@ sysrq.txt
 	- info on the magic SysRq key.
 target/
 	- directory with info on generating TCM v4 fabric .ko modules
+tee.txt
+	- info on the TEE subsystem and drivers
 this_cpu_ops.txt
 	- List rationale behind and the way to use this_cpu operations.
 thermal/
@@ -51,6 +51,18 @@ Description:
 		 Controls the dirty page count condition for the in-place-update
 		 policies.

+What:		/sys/fs/f2fs/<disk>/min_hot_blocks
+Date:		March 2017
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Controls the dirty page count condition for redefining hot data.
+
+What:		/sys/fs/f2fs/<disk>/min_ssr_sections
+Date:		October 2017
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Controls the fee section threshold to trigger SSR allocation.
+
 What:		/sys/fs/f2fs/<disk>/max_small_discards
 Date:		November 2013
 Contact:	"Jaegeuk Kim" <jaegeuk.kim@samsung.com>
@@ -102,6 +114,12 @@ Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
 Description:
 		 Controls the idle timing.

+What:		/sys/fs/f2fs/<disk>/iostat_enable
+Date:		August 2017
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Controls to enable/disable IO stat.
+
 What:		/sys/fs/f2fs/<disk>/ra_nid_pages
 Date:		October 2015
 Contact:	"Chao Yu" <chao2.yu@samsung.com>
@@ -122,6 +140,12 @@ Contact:	"Shuoran Liu" <liushuoran@huawei.com>
 Description:
 		 Shows total written kbytes issued to disk.

+What:		/sys/fs/f2fs/<disk>/feature
+Date:		July 2017
+Contact:	"Jaegeuk Kim" <jaegeuk@kernel.org>
+Description:
+		 Shows all enabled features in current device.
+
 What:		/sys/fs/f2fs/<disk>/inject_rate
 Date:		May 2016
 Contact:	"Sheng Yong" <shengyong1@huawei.com>
@@ -138,7 +162,18 @@ What:		/sys/fs/f2fs/<disk>/reserved_blocks
 Date:		June 2017
 Contact:	"Chao Yu" <yuchao0@huawei.com>
 Description:
-		 Controls current reserved blocks in system.
+		 Controls target reserved blocks in system, the threshold
+		 is soft, it could exceed current available user space.
+
+What:		/sys/fs/f2fs/<disk>/current_reserved_blocks
+Date:		October 2017
+Contact:	"Yunlong Song" <yunlong.song@huawei.com>
+Contact:	"Chao Yu" <yuchao0@huawei.com>
+Description:
+		 Shows current reserved blocks in system, it may be temporarily
+		 smaller than target_reserved_blocks, but will gradually
+		 increase to target_reserved_blocks when more free blocks are
+		 freed by user later.

 What:		/sys/fs/f2fs/<disk>/gc_urgent
 Date:		August 2017
@@ -0,0 +1,31 @@
+OP-TEE Device Tree Bindings
+
+OP-TEE is a piece of software using hardware features to provide a Trusted
+Execution Environment. The security can be provided with ARM TrustZone, but
+also by virtualization or a separate chip.
+
+We're using "linaro" as the first part of the compatible property for
+the reference implementation maintained by Linaro.
+
+* OP-TEE based on ARM TrustZone required properties:
+
+- compatible     : should contain "linaro,optee-tz"
+
+- method         : The method of calling the OP-TEE Trusted OS. Permitted
+                   values are:
+
+                   "smc" : SMC #0, with the register assignments specified
+		           in drivers/tee/optee/optee_smc.h
+
+                   "hvc" : HVC #0, with the register assignments specified
+		           in drivers/tee/optee/optee_smc.h
+
+
+
+Example:
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
@@ -34,6 +34,10 @@ Required properties:

 - reg: I2C address

+Optional properties:
+- smbus-timeout-disable: When set, the smbus timeout function will be disabled.
+			 This is not supported on all chips.
+
 Example:

 temp-sensor@1a {
@@ -156,6 +156,7 @@ lacie	LaCie
 lantiq	Lantiq Semiconductor
 lenovo	Lenovo Group Ltd.
 lg	LG Corporation
+linaro	Linaro Limited
 linux	Linux-specific binding
 lltc	Linear Technology Corporation
 lsi	LSI Corp. (LSI Logic)
@@ -308,6 +308,7 @@ Code  Seq#(hex)	Include File		Comments
 0xA3	80-8F	Port ACL		in development:
 					<mailto:tlewis@mindspring.com>
 0xA3	90-9F	linux/dtlk.h
+0xA4	00-1F	uapi/linux/tee.h	Generic TEE subsystem
 0xAA	00-3F	linux/uapi/linux/userfaultfd.h
 0xAB	00-1F	linux/nbd.h
 0xAC	00-1F	linux/raw.h
@@ -0,0 +1,118 @@
+TEE subsystem
+This document describes the TEE subsystem in Linux.
+
+A TEE (Trusted Execution Environment) is a trusted OS running in some
+secure environment, for example, TrustZone on ARM CPUs, or a separate
+secure co-processor etc. A TEE driver handles the details needed to
+communicate with the TEE.
+
+This subsystem deals with:
+
+- Registration of TEE drivers
+
+- Managing shared memory between Linux and the TEE
+
+- Providing a generic API to the TEE
+
+The TEE interface
+=================
+
+include/uapi/linux/tee.h defines the generic interface to a TEE.
+
+User space (the client) connects to the driver by opening /dev/tee[0-9]* or
+/dev/teepriv[0-9]*.
+
+- TEE_IOC_SHM_ALLOC allocates shared memory and returns a file descriptor
+  which user space can mmap. When user space doesn't need the file
+  descriptor any more, it should be closed. When shared memory isn't needed
+  any longer it should be unmapped with munmap() to allow the reuse of
+  memory.
+
+- TEE_IOC_VERSION lets user space know which TEE this driver handles and
+  the its capabilities.
+
+- TEE_IOC_OPEN_SESSION opens a new session to a Trusted Application.
+
+- TEE_IOC_INVOKE invokes a function in a Trusted Application.
+
+- TEE_IOC_CANCEL may cancel an ongoing TEE_IOC_OPEN_SESSION or TEE_IOC_INVOKE.
+
+- TEE_IOC_CLOSE_SESSION closes a session to a Trusted Application.
+
+There are two classes of clients, normal clients and supplicants. The latter is
+a helper process for the TEE to access resources in Linux, for example file
+system access. A normal client opens /dev/tee[0-9]* and a supplicant opens
+/dev/teepriv[0-9].
+
+Much of the communication between clients and the TEE is opaque to the
+driver. The main job for the driver is to receive requests from the
+clients, forward them to the TEE and send back the results. In the case of
+supplicants the communication goes in the other direction, the TEE sends
+requests to the supplicant which then sends back the result.
+
+OP-TEE driver
+=============
+
+The OP-TEE driver handles OP-TEE [1] based TEEs. Currently it is only the ARM
+TrustZone based OP-TEE solution that is supported.
+
+Lowest level of communication with OP-TEE builds on ARM SMC Calling
+Convention (SMCCC) [2], which is the foundation for OP-TEE's SMC interface
+[3] used internally by the driver. Stacked on top of that is OP-TEE Message
+Protocol [4].
+
+OP-TEE SMC interface provides the basic functions required by SMCCC and some
+additional functions specific for OP-TEE. The most interesting functions are:
+
+- OPTEE_SMC_FUNCID_CALLS_UID (part of SMCCC) returns the version information
+  which is then returned by TEE_IOC_VERSION
+
+- OPTEE_SMC_CALL_GET_OS_UUID returns the particular OP-TEE implementation, used
+  to tell, for instance, a TrustZone OP-TEE apart from an OP-TEE running on a
+  separate secure co-processor.
+
+- OPTEE_SMC_CALL_WITH_ARG drives the OP-TEE message protocol
+
+- OPTEE_SMC_GET_SHM_CONFIG lets the driver and OP-TEE agree on which memory
+  range to used for shared memory between Linux and OP-TEE.
+
+The GlobalPlatform TEE Client API [5] is implemented on top of the generic
+TEE API.
+
+Picture of the relationship between the different components in the
+OP-TEE architecture.
+
+    User space                  Kernel                   Secure world
+    ~~~~~~~~~~                  ~~~~~~                   ~~~~~~~~~~~~
+ +--------+                                             +-------------+
+ | Client |                                             | Trusted     |
+ +--------+                                             | Application |
+    /\                                                  +-------------+
+    || +----------+                                           /\
+    || |tee-      |                                           ||
+    || |supplicant|                                           \/
+    || +----------+                                     +-------------+
+    \/      /\                                          | TEE Internal|
+ +-------+  ||                                          | API         |
+ + TEE   |  ||            +--------+--------+           +-------------+
+ | Client|  ||            | TEE    | OP-TEE |           | OP-TEE      |
+ | API   |  \/            | subsys | driver |           | Trusted OS  |
+ +-------+----------------+----+-------+----+-----------+-------------+
+ |      Generic TEE API        |       |     OP-TEE MSG               |
+ |      IOCTL (TEE_IOC_*)      |       |     SMCCC (OPTEE_SMC_CALL_*) |
+ +-----------------------------+       +------------------------------+
+
+RPC (Remote Procedure Call) are requests from secure world to kernel driver
+or tee-supplicant. An RPC is identified by a special range of SMCCC return
+values from OPTEE_SMC_CALL_WITH_ARG. RPC messages which are intended for the
+kernel are handled by the kernel driver. Other RPC messages will be forwarded to
+tee-supplicant without further involvement of the driver, except switching
+shared memory buffer representation.
+
+References:
+[1] https://github.com/OP-TEE/optee_os
+[2] http://infocenter.arm.com/help/topic/com.arm.doc.den0028a/index.html
+[3] drivers/tee/optee/optee_smc.h
+[4] drivers/tee/optee/optee_msg.h
+[5] http://www.globalplatform.org/specificationsdevice.asp look for
+    "TEE Client API Specification v1.0" and click download.
@@ -9010,6 +9010,11 @@ F:	arch/*/oprofile/
 F:	drivers/oprofile/
 F:	include/linux/oprofile.h

+OP-TEE DRIVER
+M:	Jens Wiklander <jens.wiklander@linaro.org>
+S:	Maintained
+F:	drivers/tee/optee/
+
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
 M:	Mark Fasheh <mfasheh@versity.com>
 M:	Joel Becker <jlbec@evilplan.org>
@@ -10663,6 +10668,14 @@ F:	drivers/hwtracing/stm/
 F:	include/linux/stm.h
 F:	include/uapi/linux/stm.h

+TEE SUBSYSTEM
+M:	Jens Wiklander <jens.wiklander@linaro.org>
+S:	Maintained
+F:	include/linux/tee_drv.h
+F:	include/uapi/linux/tee.h
+F:	drivers/tee/
+F:	Documentation/tee.txt
+
 THUNDERBOLT DRIVER
 M:	Andreas Noever <andreas.noever@gmail.com>
 S:	Maintained
@@ -1,6 +1,6 @@
 VERSION = 4
 PATCHLEVEL = 9
-SUBLEVEL = 65
+SUBLEVEL = 67
 EXTRAVERSION =
 NAME = Roaring Lionus

@@ -192,7 +192,7 @@
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
-	cd-gpios = <&gpio4 31 IRQ_TYPE_LEVEL_LOW>;		/* gpio127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>;		/* gpio127 */
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
 	cap-power-off-card;
@@ -249,9 +249,9 @@
 			OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0)   /* cam_xclka.cam_xclka */
 			OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0)   /* cam_pclk.cam_pclk */

-			OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
-			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
-			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
+			OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0)   /* cam_d0.cam_d0 */
+			OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0)   /* cam_d1.cam_d1 */
+			OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0)   /* cam_d2.cam_d2 */
 			OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0)   /* cam_d3.cam_d3 */
 			OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0)   /* cam_d4.cam_d4 */
 			OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0)   /* cam_d5.cam_d5 */
@@ -162,7 +162,7 @@ static struct ti_st_plat_data wilink7_pdata = {
 	.nshutdown_gpio = 162,
 	.dev_name = "/dev/ttyO1",
 	.flow_cntrl = 1,
-	.baud_rate = 300000,
+	.baud_rate = 3000000,
 };

 static struct platform_device wl128x_device = {
@@ -126,8 +126,8 @@ static const struct prot_bits section_bits[] = {
 		.val	= PMD_SECT_USER,
 		.set	= "USR",
 	}, {
-		.mask	= L_PMD_SECT_RDONLY,
-		.val	= L_PMD_SECT_RDONLY,
+		.mask	= L_PMD_SECT_RDONLY | PMD_SECT_AP2,
+		.val	= L_PMD_SECT_RDONLY | PMD_SECT_AP2,
 		.set	= "ro",
 		.clear	= "RW",
 #elif __LINUX_ARM_ARCH__ >= 6
@@ -619,8 +619,8 @@ static struct section_perm ro_perms[] = {
 		.start  = (unsigned long)_stext,
 		.end    = (unsigned long)__init_begin,
 #ifdef CONFIG_ARM_LPAE
-		.mask   = ~L_PMD_SECT_RDONLY,
-		.prot   = L_PMD_SECT_RDONLY,
+		.mask   = ~(L_PMD_SECT_RDONLY | PMD_SECT_AP2),
+		.prot   = L_PMD_SECT_RDONLY | PMD_SECT_AP2,
 #else
 		.mask   = ~(PMD_SECT_APX | PMD_SECT_AP_WRITE),
 		.prot   = PMD_SECT_APX | PMD_SECT_AP_WRITE,
@@ -91,6 +91,8 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == (PTE_VALID | PTE_UXN))
 #define pte_valid_young(pte) \
 	((pte_val(pte) & (PTE_VALID | PTE_AF)) == (PTE_VALID | PTE_AF))
+#define pte_valid_user(pte) \
+	((pte_val(pte) & (PTE_VALID | PTE_USER)) == (PTE_VALID | PTE_USER))

 /*
 * Could the pte be present in the TLB? We must check mm_tlb_flush_pending
@@ -100,6 +102,18 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 #define pte_accessible(mm, pte)	\
 	(mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid_young(pte))

+/*
+ * p??_access_permitted() is true for valid user mappings (subject to the
+ * write permission check) other than user execute-only which do not have the
+ * PTE_USER bit set. PROT_NONE mappings do not have the PTE_VALID bit set.
+ */
+#define pte_access_permitted(pte, write) \
+	(pte_valid_user(pte) && (!(write) || pte_write(pte)))
+#define pmd_access_permitted(pmd, write) \
+	(pte_access_permitted(pmd_pte(pmd), (write)))
+#define pud_access_permitted(pud, write) \
+	(pte_access_permitted(pud_pte(pud), (write)))
+
 static inline pte_t clear_pte_bit(pte_t pte, pgprot_t prot)
 {
 	pte_val(pte) &= ~pgprot_val(prot);
@@ -220,10 +220,8 @@ void update_vsyscall(struct timekeeper *tk)
 	if (!use_syscall) {
 		/* tkr_mono.cycle_last == tkr_raw.cycle_last */
 		vdso_data->cs_cycle_last	= tk->tkr_mono.cycle_last;
-		vdso_data->raw_time_sec		= tk->raw_time.tv_sec;
-		vdso_data->raw_time_nsec	= (tk->raw_time.tv_nsec <<
-						   tk->tkr_raw.shift) +
-						  tk->tkr_raw.xtime_nsec;
+		vdso_data->raw_time_sec         = tk->raw_sec;
+		vdso_data->raw_time_nsec        = tk->tkr_raw.xtime_nsec;
 		vdso_data->xtime_clock_sec	= tk->xtime_sec;
 		vdso_data->xtime_clock_nsec	= tk->tkr_mono.xtime_nsec;
 		vdso_data->cs_mono_mult		= tk->tkr_mono.mult;
@@ -309,7 +309,7 @@ ENTRY(__kernel_clock_getres)
 	b.ne	4f
 	ldr	x2, 6f
 2:
-	cbz	w1, 3f
+	cbz	x1, 3f
 	stp	xzr, x2, [x1]

 3:	/* res == NULL. */
@@ -330,7 +330,7 @@ bcm47xx_leds_linksys_wrt54g3gv2[] __initconst = {
 /* Verified on: WRT54GS V1.0 */
 static const struct gpio_led
 bcm47xx_leds_linksys_wrt54g_type_0101[] __initconst = {
-	BCM47XX_GPIO_LED(0, "green", "wlan", 0, LEDS_GPIO_DEFSTATE_OFF),
+	BCM47XX_GPIO_LED(0, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF),
 	BCM47XX_GPIO_LED(1, "green", "power", 0, LEDS_GPIO_DEFSTATE_ON),
 	BCM47XX_GPIO_LED(7, "green", "dmz", 1, LEDS_GPIO_DEFSTATE_OFF),
 };
@@ -22,7 +22,6 @@ dtb-$(CONFIG_DT_NONE) += \
 	bcm63268-comtrend-vr-3032u.dtb \
 	bcm93384wvg.dtb \
 	bcm93384wvg_viper.dtb \
-	bcm96358nb4ser.dtb \
 	bcm96368mvwg.dtb \
 	bcm9ejtagprb.dtb \
 	bcm97125cbmb.dtb \
@@ -19,6 +19,9 @@
 #include <asm/asmmacro-64.h>
 #endif

+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
 /*
 * Helper macros for generating raw instruction encodings.
 */
@@ -105,6 +108,7 @@
 	.macro	fpu_save_16odd thread
 	.set	push
 	.set	mips64r2
+	.set	fp=64
 	SET_HARDFLOAT
 	sdc1	$f1,  THREAD_FPR1(\thread)
 	sdc1	$f3,  THREAD_FPR3(\thread)
@@ -163,6 +167,7 @@
 	.macro	fpu_restore_16odd thread
 	.set	push
 	.set	mips64r2
+	.set	fp=64
 	SET_HARDFLOAT
 	ldc1	$f1,  THREAD_FPR1(\thread)
 	ldc1	$f3,  THREAD_FPR3(\thread)
@@ -234,9 +239,6 @@
 	.endm

 #ifdef TOOLCHAIN_SUPPORTS_MSA
-/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
-#undef fp
-
 	.macro	_cfcmsa	rd, cs
 	.set	push
 	.set	mips32r2
@@ -647,6 +647,19 @@ static const struct user_regset_view user_mips64_view = {
 	.n		= ARRAY_SIZE(mips64_regsets),
 };

+#ifdef CONFIG_MIPS32_N32
+
+static const struct user_regset_view user_mipsn32_view = {
+	.name		= "mipsn32",
+	.e_flags	= EF_MIPS_ABI2,
+	.e_machine	= ELF_ARCH,
+	.ei_osabi	= ELF_OSABI,
+	.regsets	= mips64_regsets,
+	.n		= ARRAY_SIZE(mips64_regsets),
+};
+
+#endif /* CONFIG_MIPS32_N32 */
+
 #endif /* CONFIG_64BIT */

 const struct user_regset_view *task_user_regset_view(struct task_struct *task)
@@ -657,6 +670,10 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *task)
 #ifdef CONFIG_MIPS32_O32
 	if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
 		return &user_mips_view;
+#endif
+#ifdef CONFIG_MIPS32_N32
+	if (test_tsk_thread_flag(task, TIF_32BIT_ADDR))
+		return &user_mipsn32_view;
 #endif
 	return &user_mips64_view;
 #endif
@@ -121,7 +121,7 @@ static int wait_pciephy_busy(void)
 		else
 			break;
 		if (retry++ > WAITRETRY_MAX) {
-			printk(KERN_WARN "PCIE-PHY retry failed.\n");
+			pr_warn("PCIE-PHY retry failed.\n");
 			return -1;
 		}
 	}
@@ -141,8 +141,8 @@ static struct rt2880_pmx_func i2c_grp_mt7628[] = {
 	FUNC("i2c", 0, 4, 2),
 };

-static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) };
-static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) };
+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) };
+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) };
 static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) };
 static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) };

@@ -690,15 +690,15 @@ cas_action:
 	/* ELF32 Process entry path */
 lws_compare_and_swap_2:
 #ifdef CONFIG_64BIT
-	/* Clip the input registers */
+	/* Clip the input registers. We don't need to clip %r23 as we
+	   only use it for word operations */
 	depdi	0, 31, 32, %r26
 	depdi	0, 31, 32, %r25
 	depdi	0, 31, 32, %r24
-	depdi	0, 31, 32, %r23
 #endif

 	/* Check the validity of the size pointer */
-	subi,>>= 4, %r23, %r0
+	subi,>>= 3, %r23, %r0
 	b,n	lws_exit_nosys

 	/* Jump to the functions which will load the old and new values into
@@ -102,7 +102,7 @@ static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
 static void do_signal(struct task_struct *tsk)
 {
 	sigset_t *oldset = sigmask_to_save();
-	struct ksignal ksig;
+	struct ksignal ksig = { .sig = 0 };
 	int ret;
 	int is32 = is_32bit_task();

@@ -0,0 +1,8 @@
+#ifndef _ASM_S390_PROTOTYPES_H
+
+#include <linux/kvm_host.h>
+#include <linux/ftrace.h>
+#include <asm/fpu/api.h>
+#include <asm-generic/asm-prototypes.h>
+
+#endif /* _ASM_S390_PROTOTYPES_H */
@@ -34,8 +34,8 @@ static inline void restore_access_regs(unsigned int *acrs)
 		save_access_regs(&prev->thread.acrs[0]);		\
 		save_ri_cb(prev->thread.ri_cb);				\
 	}								\
-	if (next->mm) {							\
 	update_cr_regs(next);						\
+	if (next->mm) {							\
 		set_cpu_flag(CIF_FPU);					\
 		restore_access_regs(&next->thread.acrs[0]);		\
 		restore_ri_cb(next->thread.ri_cb, prev->thread.ri_cb);	\
@@ -1548,6 +1548,7 @@ static struct s390_insn opcode_e7[] = {
 	{ "vfsq", 0xce, INSTR_VRR_VV000MM },
 	{ "vfs", 0xe2, INSTR_VRR_VVV00MM },
 	{ "vftci", 0x4a, INSTR_VRI_VVIMM },
+	{ "", 0, INSTR_INVALID }
 };

 static struct s390_insn opcode_eb[] = {
@@ -1953,7 +1954,7 @@ void show_code(struct pt_regs *regs)
 {
 	char *mode = user_mode(regs) ? "User" : "Krnl";
 	unsigned char code[64];
-	char buffer[64], *ptr;
+	char buffer[128], *ptr;
 	mm_segment_t old_fs;
 	unsigned long addr;
 	int start, end, opsize, hops, i;
@@ -2016,7 +2017,7 @@ void show_code(struct pt_regs *regs)
 		start += opsize;
 		pr_cont("%s", buffer);
 		ptr = buffer;
-		ptr += sprintf(ptr, "\n          ");
+		ptr += sprintf(ptr, "\n\t  ");
 		hops++;
 	}
 	pr_cont("\n");
@@ -345,8 +345,10 @@ static __init void detect_machine_facilities(void)
 		S390_lowcore.machine_flags |= MACHINE_FLAG_IDTE;
 	if (test_facility(40))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_LPP;
-	if (test_facility(50) && test_facility(73))
+	if (test_facility(50) && test_facility(73)) {
 		S390_lowcore.machine_flags |= MACHINE_FLAG_TE;
+		__ctl_set_bit(0, 55);
+	}
 	if (test_facility(51))
 		S390_lowcore.machine_flags |= MACHINE_FLAG_TLB_LC;
 	if (test_facility(129)) {
@@ -120,6 +120,7 @@ int copy_thread(unsigned long clone_flags, unsigned long new_stackp,
 	memset(&p->thread.per_user, 0, sizeof(p->thread.per_user));
 	memset(&p->thread.per_event, 0, sizeof(p->thread.per_event));
 	clear_tsk_thread_flag(p, TIF_SINGLE_STEP);
+	p->thread.per_flags = 0;
 	/* Initialize per thread user and system timer values */
 	ti = task_thread_info(p);
 	ti->user_timer = 0;
@@ -47,11 +47,13 @@ void exit_thread_runtime_instr(void)
 {
 	struct task_struct *task = current;

+	preempt_disable();
 	if (!task->thread.ri_cb)
 		return;
 	disable_runtime_instr();
 	kfree(task->thread.ri_cb);
 	task->thread.ri_cb = NULL;
+	preempt_enable();
 }

 SYSCALL_DEFINE1(s390_runtime_instr, int, command)
@@ -62,9 +64,7 @@ SYSCALL_DEFINE1(s390_runtime_instr, int, command)
 		return -EOPNOTSUPP;

 	if (command == S390_RUNTIME_INSTR_STOP) {
-		preempt_disable();
 		exit_thread_runtime_instr();
-		preempt_enable();
 		return 0;
 	}

@@ -246,9 +246,14 @@ static inline void kvm_apic_set_ldr(struct kvm_lapic *apic, u32 id)
 	recalculate_apic_map(apic->vcpu->kvm);
 }

+static inline u32 kvm_apic_calc_x2apic_ldr(u32 id)
+{
+	return ((id >> 4) << 16) | (1 << (id & 0xf));
+}
+
 static inline void kvm_apic_set_x2apic_id(struct kvm_lapic *apic, u32 id)
 {
-	u32 ldr = ((id >> 4) << 16) | (1 << (id & 0xf));
+	u32 ldr = kvm_apic_calc_x2apic_ldr(id);

 	kvm_lapic_set_reg(apic, APIC_ID, id);
 	kvm_lapic_set_reg(apic, APIC_LDR, ldr);
@@ -2029,6 +2034,7 @@ static int kvm_apic_state_fixup(struct kvm_vcpu *vcpu,
 {
 	if (apic_x2apic_mode(vcpu->arch.apic)) {
 		u32 *id = (u32 *)(s->regs + APIC_ID);
+		u32 *ldr = (u32 *)(s->regs + APIC_LDR);

 		if (vcpu->kvm->arch.x2apic_format) {
 			if (*id != vcpu->vcpu_id)
@@ -2039,6 +2045,10 @@ static int kvm_apic_state_fixup(struct kvm_vcpu *vcpu,
 			else
 				*id <<= 24;
 		}
+
+		/* In x2APIC mode, the LDR is fixed and based on the id */
+		if (set)
+			*ldr = kvm_apic_calc_x2apic_ldr(*id);
 	}

 	return 0;
@@ -2149,6 +2149,8 @@ static int ud_interception(struct vcpu_svm *svm)
 	int er;

 	er = emulate_instruction(&svm->vcpu, EMULTYPE_TRAP_UD);
+	if (er == EMULATE_USER_EXIT)
+		return 0;
 	if (er != EMULATE_DONE)
 		kvm_queue_exception(&svm->vcpu, UD_VECTOR);
 	return 1;
@@ -3583,6 +3585,13 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 	u32 ecx = msr->index;
 	u64 data = msr->data;
 	switch (ecx) {
+	case MSR_IA32_CR_PAT:
+		if (!kvm_mtrr_valid(vcpu, MSR_IA32_CR_PAT, data))
+			return 1;
+		vcpu->arch.pat = data;
+		svm->vmcb->save.g_pat = data;
+		mark_dirty(svm->vmcb, VMCB_NPT);
+		break;
 	case MSR_IA32_TSC:
 		kvm_write_tsc(vcpu, msr);
 		break;
@@ -5502,6 +5502,8 @@ static int handle_exception(struct kvm_vcpu *vcpu)
 			return 1;
 		}
 		er = emulate_instruction(vcpu, EMULTYPE_TRAP_UD);
+		if (er == EMULATE_USER_EXIT)
+			return 0;
 		if (er != EMULATE_DONE)
 			kvm_queue_exception(vcpu, UD_VECTOR);
 		return 1;
@@ -10714,6 +10716,8 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 	vmcs_writel(GUEST_SYSENTER_EIP, vmcs12->host_ia32_sysenter_eip);
 	vmcs_writel(GUEST_IDTR_BASE, vmcs12->host_idtr_base);
 	vmcs_writel(GUEST_GDTR_BASE, vmcs12->host_gdtr_base);
+	vmcs_write32(GUEST_IDTR_LIMIT, 0xFFFF);
+	vmcs_write32(GUEST_GDTR_LIMIT, 0xFFFF);

 	/* If not VM_EXIT_CLEAR_BNDCFGS, the L2 value propagates to L1.  */
 	if (vmcs12->vm_exit_controls & VM_EXIT_CLEAR_BNDCFGS)
@@ -1797,6 +1797,9 @@ static void kvm_setup_pvclock_page(struct kvm_vcpu *v)
 	 */
 	BUILD_BUG_ON(offsetof(struct pvclock_vcpu_time_info, version) != 0);

+	if (guest_hv_clock.version & 1)
+		++guest_hv_clock.version;  /* first time write, random junk */
+
 	vcpu->hv_clock.version = guest_hv_clock.version + 1;
 	kvm_write_guest_cached(v->kvm, &vcpu->pv_time,
 				&vcpu->hv_clock,
@@ -5576,6 +5579,8 @@ int x86_emulate_instruction(struct kvm_vcpu *vcpu,
 			if (reexecute_instruction(vcpu, cr2, write_fault_to_spt,
 						emulation_type))
 				return EMULATE_DONE;
+			if (ctxt->have_exception && inject_emulated_exception(vcpu))
+				return EMULATE_DONE;
 			if (emulation_type & EMULTYPE_SKIP)
 				return EMULATE_FAIL;
 			return handle_emulation_failure(vcpu);
@@ -896,7 +896,7 @@ EndTable

 GrpTable: Grp3_1
 0: TEST Eb,Ib
-1:
+1: TEST Eb,Ib
 2: NOT Eb
 3: NEG Eb
 4: MUL AL,Eb
@@ -1392,7 +1392,17 @@ good_area:
 	 * make sure we exit gracefully rather than endlessly redo
 	 * the fault.  Since we never set FAULT_FLAG_RETRY_NOWAIT, if
 	 * we get VM_FAULT_RETRY back, the mmap_sem has been unlocked.
+	 *
+	 * Note that handle_userfault() may also release and reacquire mmap_sem
+	 * (and not return with VM_FAULT_RETRY), when returning to userland to
+	 * repeat the page fault later with a VM_FAULT_NOPAGE retval
+	 * (potentially after handling any pending signal during the return to
+	 * userland). The return to userland is identified whenever
+	 * FAULT_FLAG_USER|FAULT_FLAG_KILLABLE are both set in flags.
+	 * Thus we have to be careful about not touching vma after handling the
+	 * fault, so we read the pkey beforehand.
 	 */
+	pkey = vma_pkey(vma);
 	fault = handle_mm_fault(vma, address, flags);
 	major |= fault & VM_FAULT_MAJOR;

@@ -1419,7 +1429,6 @@ good_area:
 		return;
 	}

-	pkey = vma_pkey(vma);
 	up_read(&mm->mmap_sem);
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		mm_fault_error(regs, error_code, address, &pkey, fault);
@@ -284,6 +284,7 @@ EXPORT_SYMBOL(blk_stop_queue);
 void blk_sync_queue(struct request_queue *q)
 {
 	del_timer_sync(&q->timeout);
+	cancel_work_sync(&q->timeout_work);

 	if (q->mq_ops) {
 		struct blk_mq_hw_ctx *hctx;
@@ -722,6 +723,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
 	setup_timer(&q->backing_dev_info.laptop_mode_wb_timer,
 		    laptop_mode_timer_fn, (unsigned long) q);
 	setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q);
+	INIT_WORK(&q->timeout_work, NULL);
 	INIT_LIST_HEAD(&q->queue_head);
 	INIT_LIST_HEAD(&q->timeout_list);
 	INIT_LIST_HEAD(&q->icq_list);
@@ -135,8 +135,6 @@ void blk_timeout_work(struct work_struct *work)
 	struct request *rq, *tmp;
 	int next_set = 0;

-	if (blk_queue_enter(q, true))
-		return;
 	spin_lock_irqsave(q->queue_lock, flags);

 	list_for_each_entry_safe(rq, tmp, &q->timeout_list, timeout_list)
@@ -146,7 +144,6 @@ void blk_timeout_work(struct work_struct *work)
 		mod_timer(&q->timeout, round_jiffies_up(next));

 	spin_unlock_irqrestore(q->queue_lock, flags);
-	blk_queue_exit(q);
 }

 /**
@@ -208,4 +208,6 @@ source "drivers/hisi/Kconfig"

 source "drivers/fpga/Kconfig"

+source "drivers/tee/Kconfig"
+
 endmenu
@@ -175,4 +175,5 @@ obj-$(CONFIG_STM)		+= hwtracing/stm/
 obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_NVMEM)		+= nvmem/
 obj-$(CONFIG_FPGA)		+= fpga/
+obj-$(CONFIG_TEE)		+= tee/
 obj-$(CONFIG_HISILICON_PLATFORM)+= hisi/
@@ -482,7 +482,10 @@ static inline void __acpi_ec_enable_event(struct acpi_ec *ec)
 {
 	if (!test_and_set_bit(EC_FLAGS_QUERY_ENABLED, &ec->flags))
 		ec_log_drv("event unblocked");
-	if (!test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags))
+	/*
+	 * Unconditionally invoke this once after enabling the event
+	 * handling mechanism to detect the pending events.
+	 */
 	advance_transaction(ec);
 }

@@ -1458,11 +1461,10 @@ static int ec_install_handlers(struct acpi_ec *ec, bool handle_events)
 			if (test_bit(EC_FLAGS_STARTED, &ec->flags) &&
 			    ec->reference_count >= 1)
 				acpi_ec_enable_gpe(ec, true);
-
+		}
+	}
 	/* EC is fully operational, allow queries */
 	acpi_ec_enable_event(ec);
-		}
-	}

 	return 0;
 }
@@ -2329,8 +2329,8 @@ static void ata_eh_link_autopsy(struct ata_link *link)
 		if (dev->flags & ATA_DFLAG_DUBIOUS_XFER)
 			eflags |= ATA_EFLAG_DUBIOUS_XFER;
 		ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask);
-	}
 		trace_ata_eh_link_autopsy(dev, ehc->i.action, all_err_mask);
+	}
 	DPRINTK("EXIT\n");
 }

@@ -348,6 +348,7 @@ static int _of_add_opp_table_v2(struct device *dev, struct device_node *opp_np)
 		if (ret) {
 			dev_err(dev, "%s: Failed to add OPP, %d\n", __func__,
 				ret);
+			of_node_put(np);
 			goto free_table;
 		}
 	}
@@ -527,8 +527,18 @@ static struct clk_rcg2  sdcc1_apps_clk_src = {
 static const struct freq_tbl ftbl_gcc_apps_clk[] = {
 	F(48000000,  P_XO,         1, 0, 0),
 	F(200000000, P_FEPLL200,   1, 0, 0),
+	F(384000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(413000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(448000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(488000000, P_DDRPLLAPSS, 1, 0, 0),
 	F(500000000, P_FEPLL500,   1, 0, 0),
-	F(626000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(512000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(537000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(565000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(597000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(632000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(672000000, P_DDRPLLAPSS, 1, 0, 0),
+	F(716000000, P_DDRPLLAPSS, 1, 0, 0),
 	{ }
 };

@@ -468,8 +468,8 @@ static SUNXI_CCU_MUX_WITH_GATE(daudio0_clk, "daudio0", daudio_parents,
 static SUNXI_CCU_MUX_WITH_GATE(daudio1_clk, "daudio1", daudio_parents,
 			       0x0b4, 16, 2, BIT(31), CLK_SET_RATE_PARENT);

-static SUNXI_CCU_M_WITH_GATE(spdif_clk, "spdif", "pll-audio",
-			     0x0c0, 0, 4, BIT(31), CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MUX_WITH_GATE(spdif_clk, "spdif", daudio_parents,
+			       0x0c0, 16, 2, BIT(31), CLK_SET_RATE_PARENT);

 static SUNXI_CCU_GATE(usb_phy0_clk,	"usb-phy0",	"osc24M",
 		      0x0cc, BIT(8), 0);
@@ -752,6 +752,13 @@ static const struct sunxi_ccu_desc sun8i_a33_ccu_desc = {
 	.num_resets	= ARRAY_SIZE(sun8i_a33_ccu_resets),
 };

+static struct ccu_mux_nb sun8i_a33_cpu_nb = {
+	.common		= &cpux_clk.common,
+	.cm		= &cpux_clk.mux,
+	.delay_us	= 1, /* > 8 clock cycles at 24 MHz */
+	.bypass_index	= 1, /* index of 24 MHz oscillator */
+};
+
 static void __init sun8i_a33_ccu_setup(struct device_node *node)
 {
 	void __iomem *reg;
@@ -775,6 +782,9 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 	writel(val, reg + SUN8I_A33_PLL_MIPI_REG);

 	sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
+
+	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
+				  &sun8i_a33_cpu_nb);
 }
 CLK_OF_DECLARE(sun8i_a33_ccu, "allwinner,sun8i-a33-ccu",
 	       sun8i_a33_ccu_setup);
@@ -265,8 +265,7 @@ static int of_dra7_atl_clk_probe(struct platform_device *pdev)

 		/* Get configuration for the ATL instances */
 		snprintf(prop, sizeof(prop), "atl%u", i);
-		of_node_get(node);
-		cfg_node = of_find_node_by_name(node, prop);
+		cfg_node = of_get_child_by_name(node, prop);
 		if (cfg_node) {
 			ret = of_property_read_u32(cfg_node, "bws",
 						   &cdesc->bws);
@@ -273,7 +273,8 @@ struct mv_cesa_op_ctx {
 #define CESA_TDMA_SRC_IN_SRAM			BIT(30)
 #define CESA_TDMA_END_OF_REQ			BIT(29)
 #define CESA_TDMA_BREAK_CHAIN			BIT(28)
-#define CESA_TDMA_TYPE_MSK			GENMASK(27, 0)
+#define CESA_TDMA_SET_STATE			BIT(27)
+#define CESA_TDMA_TYPE_MSK			GENMASK(26, 0)
 #define CESA_TDMA_DUMMY				0
 #define CESA_TDMA_DATA				1
 #define CESA_TDMA_OP				2
@@ -280,13 +280,32 @@ static void mv_cesa_ahash_std_prepare(struct ahash_request *req)
 	sreq->offset = 0;
 }

+static void mv_cesa_ahash_dma_step(struct ahash_request *req)
+{
+	struct mv_cesa_ahash_req *creq = ahash_request_ctx(req);
+	struct mv_cesa_req *base = &creq->base;
+
+	/* We must explicitly set the digest state. */
+	if (base->chain.first->flags & CESA_TDMA_SET_STATE) {
+		struct mv_cesa_engine *engine = base->engine;
+		int i;
+
+		/* Set the hash state in the IVDIG regs. */
+		for (i = 0; i < ARRAY_SIZE(creq->state); i++)
+			writel_relaxed(creq->state[i], engine->regs +
+				       CESA_IVDIG(i));
+	}
+
+	mv_cesa_dma_step(base);
+}
+
 static void mv_cesa_ahash_step(struct crypto_async_request *req)
 {
 	struct ahash_request *ahashreq = ahash_request_cast(req);
 	struct mv_cesa_ahash_req *creq = ahash_request_ctx(ahashreq);

 	if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ)
-		mv_cesa_dma_step(&creq->base);
+		mv_cesa_ahash_dma_step(ahashreq);
 	else
 		mv_cesa_ahash_std_step(ahashreq);
 }
@@ -562,11 +581,15 @@ static int mv_cesa_ahash_dma_req_init(struct ahash_request *req)
 	struct mv_cesa_ahash_dma_iter iter;
 	struct mv_cesa_op_ctx *op = NULL;
 	unsigned int frag_len;
+	bool set_state = false;
 	int ret;

 	basereq->chain.first = NULL;
 	basereq->chain.last = NULL;

+	if (!mv_cesa_mac_op_is_first_frag(&creq->op_tmpl))
+		set_state = true;
+
 	if (creq->src_nents) {
 		ret = dma_map_sg(cesa_dev->dev, req->src, creq->src_nents,
 				 DMA_TO_DEVICE);
@@ -650,6 +673,15 @@ static int mv_cesa_ahash_dma_req_init(struct ahash_request *req)
 	basereq->chain.last->flags |= (CESA_TDMA_END_OF_REQ |
 				       CESA_TDMA_BREAK_CHAIN);

+	if (set_state) {
+		/*
+		 * Put the CESA_TDMA_SET_STATE flag on the first tdma desc to
+		 * let the step logic know that the IVDIG registers should be
+		 * explicitly set before launching a TDMA chain.
+		 */
+		basereq->chain.first->flags |= CESA_TDMA_SET_STATE;
+	}
+
 	return 0;

 err_free_tdma:
@@ -112,7 +112,14 @@ void mv_cesa_tdma_chain(struct mv_cesa_engine *engine,
 		last->next = dreq->chain.first;
 		engine->chain.last = dreq->chain.last;

-		if (!(last->flags & CESA_TDMA_BREAK_CHAIN))
+		/*
+		 * Break the DMA chain if the CESA_TDMA_BREAK_CHAIN is set on
+		 * the last element of the current chain, or if the request
+		 * being queued needs the IV regs to be set before lauching
+		 * the request.
+		 */
+		if (!(last->flags & CESA_TDMA_BREAK_CHAIN) &&
+		    !(dreq->chain.first->flags & CESA_TDMA_SET_STATE))
 			last->next_dma = dreq->chain.first->cur_dma;
 	}
 }
@@ -813,6 +813,7 @@ static int zx_dma_probe(struct platform_device *op)
 	INIT_LIST_HEAD(&d->slave.channels);
 	dma_cap_set(DMA_SLAVE, d->slave.cap_mask);
 	dma_cap_set(DMA_MEMCPY, d->slave.cap_mask);
+	dma_cap_set(DMA_CYCLIC, d->slave.cap_mask);
 	dma_cap_set(DMA_PRIVATE, d->slave.cap_mask);
 	d->slave.dev = &op->dev;
 	d->slave.device_free_chan_resources = zx_dma_free_chan_resources;
@@ -126,7 +126,7 @@ static int mockup_gpio_probe(struct platform_device *pdev)
 	int i;
 	int base;
 	int ngpio;
-	char chip_name[sizeof(GPIO_NAME) + 3];
+	char *chip_name;

 	if (gpio_mockup_params_nr < 2)
 		return -EINVAL;
@@ -146,8 +146,12 @@ static int mockup_gpio_probe(struct platform_device *pdev)
 			ngpio = gpio_mockup_ranges[i * 2 + 1] - base;

 		if (ngpio >= 0) {
-			sprintf(chip_name, "%s-%c", GPIO_NAME,
+			chip_name = devm_kasprintf(dev, GFP_KERNEL,
+						   "%s-%c", GPIO_NAME,
 						   pins_name_start + i);
+			if (!chip_name)
+				return -ENOMEM;
+
 			ret = mockup_gpio_add(dev, &cntr[i],
 					      chip_name, base, ngpio);
 		} else {
@@ -1788,34 +1788,32 @@ void amdgpu_atombios_scratch_regs_restore(struct amdgpu_device *adev)
 		WREG32(mmBIOS_SCRATCH_0 + i, adev->bios_scratch[i]);
 }

-/* Atom needs data in little endian format
- * so swap as appropriate when copying data to
- * or from atom. Note that atom operates on
- * dw units.
+/* Atom needs data in little endian format so swap as appropriate when copying
+ * data to or from atom. Note that atom operates on dw units.
+ *
+ * Use to_le=true when sending data to atom and provide at least
+ * ALIGN(num_bytes,4) bytes in the dst buffer.
+ *
+ * Use to_le=false when receiving data from atom and provide ALIGN(num_bytes,4)
+ * byes in the src buffer.
 */
 void amdgpu_atombios_copy_swap(u8 *dst, u8 *src, u8 num_bytes, bool to_le)
 {
 #ifdef __BIG_ENDIAN
-	u8 src_tmp[20], dst_tmp[20]; /* used for byteswapping */
-	u32 *dst32, *src32;
+	u32 src_tmp[5], dst_tmp[5];
 	int i;
+	u8 align_num_bytes = ALIGN(num_bytes, 4);

-	memcpy(src_tmp, src, num_bytes);
-	src32 = (u32 *)src_tmp;
-	dst32 = (u32 *)dst_tmp;
 	if (to_le) {
-		for (i = 0; i < ((num_bytes + 3) / 4); i++)
-			dst32[i] = cpu_to_le32(src32[i]);
-		memcpy(dst, dst_tmp, num_bytes);
+		memcpy(src_tmp, src, num_bytes);
+		for (i = 0; i < align_num_bytes / 4; i++)
+			dst_tmp[i] = cpu_to_le32(src_tmp[i]);
+		memcpy(dst, dst_tmp, align_num_bytes);
 	} else {
-		u8 dws = num_bytes & ~3;
-		for (i = 0; i < ((num_bytes + 3) / 4); i++)
-			dst32[i] = le32_to_cpu(src32[i]);
-		memcpy(dst, dst_tmp, dws);
-		if (num_bytes % 4) {
-			for (i = 0; i < (num_bytes % 4); i++)
-				dst[dws+i] = dst_tmp[dws+i];
-		}
+		memcpy(src_tmp, src, align_num_bytes);
+		for (i = 0; i < align_num_bytes / 4; i++)
+			dst_tmp[i] = le32_to_cpu(src_tmp[i]);
+		memcpy(dst, dst_tmp, num_bytes);
 	}
 #else
 	memcpy(dst, src, num_bytes);
@@ -648,7 +648,7 @@ int amdgpu_vce_ring_parse_cs(struct amdgpu_cs_parser *p, uint32_t ib_idx)
 	uint32_t allocated = 0;
 	uint32_t tmp, handle = 0;
 	uint32_t *size = &tmp;
-	int i, r, idx = 0;
+	int i, r = 0, idx = 0;

 	r = amdgpu_cs_sysvm_access_required(p);
 	if (r)
@@ -744,7 +744,7 @@ error_free:
 int amdgpu_vm_update_page_directory(struct amdgpu_device *adev,
                                   struct amdgpu_vm *vm)
 {
-	int r;
+	int r = 0;

 	r = amdgpu_vm_update_pd_or_shadow(adev, vm, true);
 	if (r)
@@ -850,9 +850,9 @@ static int init_over_drive_limits(
 		const ATOM_Tonga_POWERPLAYTABLE *powerplay_table)
 {
 	hwmgr->platform_descriptor.overdriveLimit.engineClock =
-		le16_to_cpu(powerplay_table->ulMaxODEngineClock);
+		le32_to_cpu(powerplay_table->ulMaxODEngineClock);
 	hwmgr->platform_descriptor.overdriveLimit.memoryClock =
-		le16_to_cpu(powerplay_table->ulMaxODMemoryClock);
+		le32_to_cpu(powerplay_table->ulMaxODMemoryClock);

 	hwmgr->platform_descriptor.minOverdriveVDDC = 0;
 	hwmgr->platform_descriptor.maxOverdriveVDDC = 0;
@@ -4,3 +4,5 @@ armada-y	+= armada_510.o
 armada-$(CONFIG_DEBUG_FS) += armada_debugfs.o

 obj-$(CONFIG_DRM_ARMADA) := armada.o
+
+CFLAGS_armada_trace.o := -I$(src)
@@ -348,14 +348,12 @@ static void drm_mm_insert_helper_range(struct drm_mm_node *hole_node,

 	BUG_ON(!hole_node->hole_follows || node->allocated);

-	if (adj_start < start)
-		adj_start = start;
-	if (adj_end > end)
-		adj_end = end;
-
 	if (mm->color_adjust)
 		mm->color_adjust(hole_node, color, &adj_start, &adj_end);

+	adj_start = max(adj_start, start);
+	adj_end = min(adj_end, end);
+
 	if (flags & DRM_MM_CREATE_TOP)
 		adj_start = adj_end - size;

@@ -566,17 +564,15 @@ static struct drm_mm_node *drm_mm_search_free_in_range_generic(const struct drm_
 			       flags & DRM_MM_SEARCH_BELOW) {
 		u64 hole_size = adj_end - adj_start;

-		if (adj_start < start)
-			adj_start = start;
-		if (adj_end > end)
-			adj_end = end;
-
 		if (mm->color_adjust) {
 			mm->color_adjust(entry, color, &adj_start, &adj_end);
 			if (adj_end <= adj_start)
 				continue;
 		}

+		adj_start = max(adj_start, start);
+		adj_end = min(adj_end, end);
+
 		if (!check_free_hole(adj_start, adj_end, size, alignment))
 			continue;

@@ -521,9 +521,12 @@ static void ade_crtc_atomic_begin(struct drm_crtc *crtc,
 {
 	struct ade_crtc *acrtc = to_ade_crtc(crtc);
 	struct ade_hw_ctx *ctx = acrtc->ctx;
+	struct drm_display_mode *mode = &crtc->state->mode;
+	struct drm_display_mode *adj_mode = &crtc->state->adjusted_mode;

 	if (!ctx->power_on)
 		(void)ade_power_up(ctx);
+	ade_ldi_set_mode(acrtc, mode, adj_mode);
 }

 static void ade_crtc_atomic_flush(struct drm_crtc *crtc,
@@ -457,6 +457,7 @@ struct intel_crtc_scaler_state {

 struct intel_pipe_wm {
 	struct intel_wm_level wm[5];
+	struct intel_wm_level raw_wm[5];
 	uint32_t linetime;
 	bool fbc_wm_enabled;
 	bool pipe_enabled;
@@ -430,7 +430,9 @@ static bool
 gmbus_is_index_read(struct i2c_msg *msgs, int i, int num)
 {
 	return (i + 1 < num &&
-		!(msgs[i].flags & I2C_M_RD) && msgs[i].len <= 2 &&
+		msgs[i].addr == msgs[i + 1].addr &&
+		!(msgs[i].flags & I2C_M_RD) &&
+		(msgs[i].len == 1 || msgs[i].len == 2) &&
 		(msgs[i + 1].flags & I2C_M_RD));
 }

@@ -27,7 +27,6 @@

 #include <linux/cpufreq.h>
 #include <drm/drm_plane_helper.h>
-#include <drm/drm_atomic_helper.h>
 #include "i915_drv.h"
 #include "intel_drv.h"
 #include "../../../platform/x86/intel_ips.h"
@@ -2018,9 +2017,9 @@ static void ilk_compute_wm_level(const struct drm_i915_private *dev_priv,
 				 const struct intel_crtc *intel_crtc,
 				 int level,
 				 struct intel_crtc_state *cstate,
-				 const struct intel_plane_state *pristate,
-				 const struct intel_plane_state *sprstate,
-				 const struct intel_plane_state *curstate,
+				 struct intel_plane_state *pristate,
+				 struct intel_plane_state *sprstate,
+				 struct intel_plane_state *curstate,
 				 struct intel_wm_level *result)
 {
 	uint16_t pri_latency = dev_priv->wm.pri_latency[level];
@@ -2342,24 +2341,28 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate)
 	struct intel_pipe_wm *pipe_wm;
 	struct drm_device *dev = state->dev;
 	const struct drm_i915_private *dev_priv = to_i915(dev);
-	struct drm_plane *plane;
-	const struct drm_plane_state *plane_state;
-	const struct intel_plane_state *pristate = NULL;
-	const struct intel_plane_state *sprstate = NULL;
-	const struct intel_plane_state *curstate = NULL;
+	struct intel_plane *intel_plane;
+	struct intel_plane_state *pristate = NULL;
+	struct intel_plane_state *sprstate = NULL;
+	struct intel_plane_state *curstate = NULL;
 	int level, max_level = ilk_wm_max_level(dev), usable_level;
 	struct ilk_wm_maximums max;

 	pipe_wm = &cstate->wm.ilk.optimal;

-	drm_atomic_crtc_state_for_each_plane_state(plane, plane_state, &cstate->base) {
-		const struct intel_plane_state *ps = to_intel_plane_state(plane_state);
+	for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) {
+		struct intel_plane_state *ps;

-		if (plane->type == DRM_PLANE_TYPE_PRIMARY)
+		ps = intel_atomic_get_existing_plane_state(state,
+							   intel_plane);
+		if (!ps)
+			continue;
+
+		if (intel_plane->base.type == DRM_PLANE_TYPE_PRIMARY)
 			pristate = ps;
-		else if (plane->type == DRM_PLANE_TYPE_OVERLAY)
+		else if (intel_plane->base.type == DRM_PLANE_TYPE_OVERLAY)
 			sprstate = ps;
-		else if (plane->type == DRM_PLANE_TYPE_CURSOR)
+		else if (intel_plane->base.type == DRM_PLANE_TYPE_CURSOR)
 			curstate = ps;
 	}

@@ -2381,9 +2384,11 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate)
 	if (pipe_wm->sprites_scaled)
 		usable_level = 0;

-	memset(&pipe_wm->wm, 0, sizeof(pipe_wm->wm));
 	ilk_compute_wm_level(dev_priv, intel_crtc, 0, cstate,
-			     pristate, sprstate, curstate, &pipe_wm->wm[0]);
+			     pristate, sprstate, curstate, &pipe_wm->raw_wm[0]);
+
+	memset(&pipe_wm->wm, 0, sizeof(pipe_wm->wm));
+	pipe_wm->wm[0] = pipe_wm->raw_wm[0];

 	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
 		pipe_wm->linetime = hsw_compute_linetime_wm(cstate);
@@ -2393,8 +2398,8 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate)

 	ilk_compute_wm_reg_maximums(dev, 1, &max);

-	for (level = 1; level <= usable_level; level++) {
-		struct intel_wm_level *wm = &pipe_wm->wm[level];
+	for (level = 1; level <= max_level; level++) {
+		struct intel_wm_level *wm = &pipe_wm->raw_wm[level];

 		ilk_compute_wm_level(dev_priv, intel_crtc, level, cstate,
 				     pristate, sprstate, curstate, wm);
@@ -2404,10 +2409,13 @@ static int ilk_compute_pipe_wm(struct intel_crtc_state *cstate)
 		 * register maximums since such watermarks are
 		 * always invalid.
 		 */
-		if (!ilk_validate_wm_level(level, &max, wm)) {
-			memset(wm, 0, sizeof(*wm));
-			break;
-		}
+		if (level > usable_level)
+			continue;
+
+		if (ilk_validate_wm_level(level, &max, wm))
+			pipe_wm->wm[level] = *wm;
+		else
+			usable_level = level;
 	}

 	return 0;
@@ -321,7 +321,8 @@ static void mtk_drm_unbind(struct device *dev)
 {
 	struct mtk_drm_private *private = dev_get_drvdata(dev);

-	drm_put_dev(private->drm);
+	drm_dev_unregister(private->drm);
+	drm_dev_unref(private->drm);
 	private->drm = NULL;
 }

@@ -369,6 +369,7 @@ static int panel_simple_remove(struct device *dev)
 	drm_panel_remove(&panel->base);

 	panel_simple_disable(&panel->base);
+	panel_simple_unprepare(&panel->base);

 	if (panel->ddc)
 		put_device(&panel->ddc->dev);
@@ -384,6 +385,7 @@ static void panel_simple_shutdown(struct device *dev)
 	struct panel_simple *panel = dev_get_drvdata(dev);

 	panel_simple_disable(&panel->base);
+	panel_simple_unprepare(&panel->base);
 }

 static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
@@ -45,34 +45,32 @@ static char *pre_emph_names[] = {

 /***** radeon AUX functions *****/

-/* Atom needs data in little endian format
- * so swap as appropriate when copying data to
- * or from atom. Note that atom operates on
- * dw units.
+/* Atom needs data in little endian format so swap as appropriate when copying
+ * data to or from atom. Note that atom operates on dw units.
+ *
+ * Use to_le=true when sending data to atom and provide at least
+ * ALIGN(num_bytes,4) bytes in the dst buffer.
+ *
+ * Use to_le=false when receiving data from atom and provide ALIGN(num_bytes,4)
+ * byes in the src buffer.
 */
 void radeon_atom_copy_swap(u8 *dst, u8 *src, u8 num_bytes, bool to_le)
 {
 #ifdef __BIG_ENDIAN
-	u8 src_tmp[20], dst_tmp[20]; /* used for byteswapping */
-	u32 *dst32, *src32;
+	u32 src_tmp[5], dst_tmp[5];
 	int i;
+	u8 align_num_bytes = ALIGN(num_bytes, 4);

-	memcpy(src_tmp, src, num_bytes);
-	src32 = (u32 *)src_tmp;
-	dst32 = (u32 *)dst_tmp;
 	if (to_le) {
-		for (i = 0; i < ((num_bytes + 3) / 4); i++)
-			dst32[i] = cpu_to_le32(src32[i]);
-		memcpy(dst, dst_tmp, num_bytes);
+		memcpy(src_tmp, src, num_bytes);
+		for (i = 0; i < align_num_bytes / 4; i++)
+			dst_tmp[i] = cpu_to_le32(src_tmp[i]);
+		memcpy(dst, dst_tmp, align_num_bytes);
 	} else {
-		u8 dws = num_bytes & ~3;
-		for (i = 0; i < ((num_bytes + 3) / 4); i++)
-			dst32[i] = le32_to_cpu(src32[i]);
-		memcpy(dst, dst_tmp, dws);
-		if (num_bytes % 4) {
-			for (i = 0; i < (num_bytes % 4); i++)
-				dst[dws+i] = dst_tmp[dws+i];
-		}
+		memcpy(src_tmp, src, align_num_bytes);
+		for (i = 0; i < align_num_bytes / 4; i++)
+			dst_tmp[i] = le32_to_cpu(src_tmp[i]);
+		memcpy(dst, dst_tmp, num_bytes);
 	}
 #else
 	memcpy(dst, src, num_bytes);
@@ -252,7 +252,6 @@ static int radeonfb_create(struct drm_fb_helper *helper,
 	}

 	info->par = rfbdev;
-	info->skip_vt_switch = true;

 	ret = radeon_framebuffer_init(rdev->ddev, &rfbdev->rfb, &mode_cmd, gobj);
 	if (ret) {
@@ -172,7 +172,7 @@ int sun4i_backend_update_layer_formats(struct sun4i_backend *backend,
 	ret = sun4i_backend_drm_format_to_layer(plane, fb->pixel_format, &val);
 	if (ret) {
 		DRM_DEBUG_DRIVER("Invalid format\n");
-		return val;
+		return ret;
 	}

 	regmap_update_bits(backend->regs, SUN4I_BACKEND_ATTCTL_REG1(layer),
@@ -473,6 +473,7 @@ static int ttm_buffer_object_transfer(struct ttm_buffer_object *bo,
 	INIT_LIST_HEAD(&fbo->lru);
 	INIT_LIST_HEAD(&fbo->swap);
 	INIT_LIST_HEAD(&fbo->io_reserve_lru);
+	mutex_init(&fbo->wu_mutex);
 	fbo->moving = NULL;
 	drm_vma_node_reset(&fbo->vma_node);
 	atomic_set(&fbo->cpu_writers, 0);
@@ -22,6 +22,7 @@
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

+#include <linux/bitops.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/slab.h>
@@ -45,6 +46,7 @@ static const unsigned short normal_i2c[] = {
 #define JC42_REG_TEMP		0x05
 #define JC42_REG_MANID		0x06
 #define JC42_REG_DEVICEID	0x07
+#define JC42_REG_SMBUS		0x22 /* NXP and Atmel, possibly others? */

 /* Status bits in temperature register */
 #define JC42_ALARM_CRIT_BIT	15
@@ -73,6 +75,9 @@ static const unsigned short normal_i2c[] = {
 #define ONS_MANID		0x1b09  /* ON Semiconductor */
 #define STM_MANID		0x104a  /* ST Microelectronics */

+/* SMBUS register */
+#define SMBUS_STMOUT		BIT(7)  /* SMBus time-out, active low */
+
 /* Supported chips */

 /* Analog Devices */
@@ -476,6 +481,22 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)

 	data->extended = !!(cap & JC42_CAP_RANGE);

+	if (device_property_read_bool(dev, "smbus-timeout-disable")) {
+		int smbus;
+
+		/*
+		 * Not all chips support this register, but from a
+		 * quick read of various datasheets no chip appears
+		 * incompatible with the below attempt to disable
+		 * the timeout. And the whole thing is opt-in...
+		 */
+		smbus = i2c_smbus_read_word_swapped(client, JC42_REG_SMBUS);
+		if (smbus < 0)
+			return smbus;
+		i2c_smbus_write_word_swapped(client, JC42_REG_SMBUS,
+					     smbus | SMBUS_STMOUT);
+	}
+
 	config = i2c_smbus_read_word_swapped(client, JC42_REG_CONFIG);
 	if (config < 0)
 		return config;
@@ -1592,6 +1592,9 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Default timeout in interrupt mode: 200 ms */
 	priv->adapter.timeout = HZ / 5;

+	if (dev->irq == IRQ_NOTCONNECTED)
+		priv->features &= ~FEATURE_IRQ;
+
 	if (priv->features & FEATURE_IRQ) {
 		u16 pcictl, pcists;

@@ -119,7 +119,7 @@ static int cm3232_reg_init(struct cm3232_chip *chip)
 	if (ret < 0)
 		dev_err(&chip->client->dev, "Error writing reg_cmd\n");

-	return 0;
+	return ret;
 }

 /**
@@ -648,12 +648,19 @@ static void srp_path_rec_completion(int status,
 static int srp_lookup_path(struct srp_rdma_ch *ch)
 {
 	struct srp_target_port *target = ch->target;
-	int ret;
+	int ret = -ENODEV;

 	ch->path.numb_path = 1;

 	init_completion(&ch->done);

+	/*
+	 * Avoid that the SCSI host can be removed by srp_remove_target()
+	 * before srp_path_rec_completion() is called.
+	 */
+	if (!scsi_host_get(target->scsi_host))
+		goto out;
+
 	ch->path_query_id = ib_sa_path_rec_get(&srp_sa_client,
 					       target->srp_host->srp_dev->dev,
 					       target->srp_host->port,
@@ -667,18 +674,24 @@ static int srp_lookup_path(struct srp_rdma_ch *ch)
 					       GFP_KERNEL,
 					       srp_path_rec_completion,
 					       ch, &ch->path_query);
-	if (ch->path_query_id < 0)
-		return ch->path_query_id;
+	ret = ch->path_query_id;
+	if (ret < 0)
+		goto put;

 	ret = wait_for_completion_interruptible(&ch->done);
 	if (ret < 0)
-		return ret;
+		goto put;

-	if (ch->status < 0)
+	ret = ch->status;
+	if (ret < 0)
 		shost_printk(KERN_WARNING, target->scsi_host,
 			     PFX "Path record query failed\n");

-	return ch->status;
+put:
+	scsi_host_put(target->scsi_host);
+
+out:
+	return ret;
 }

 static int srp_send_req(struct srp_rdma_ch *ch, bool multich)
@@ -2750,7 +2750,7 @@ static int srpt_parse_i_port_id(u8 i_port_id[16], const char *name)
 {
 	const char *p;
 	unsigned len, count, leading_zero_bytes;
-	int ret, rc;
+	int ret;

 	p = name;
 	if (strncasecmp(p, "0x", 2) == 0)
@@ -2762,10 +2762,9 @@ static int srpt_parse_i_port_id(u8 i_port_id[16], const char *name)
 	count = min(len / 2, 16U);
 	leading_zero_bytes = 16 - count;
 	memset(i_port_id, 0, leading_zero_bytes);
-	rc = hex2bin(i_port_id + leading_zero_bytes, p, count);
-	if (rc < 0)
-		pr_debug("hex2bin failed for srpt_parse_i_port_id: %d\n", rc);
-	ret = 0;
+	ret = hex2bin(i_port_id + leading_zero_bytes, p, count);
+	if (ret < 0)
+		pr_debug("hex2bin failed for srpt_parse_i_port_id: %d\n", ret);
 out:
 	return ret;
 }
@@ -1022,18 +1022,18 @@ static void __init gic_populate_ppi_partitions(struct device_node *gic_node)
 	int nr_parts;
 	struct partition_affinity *parts;

-	parts_node = of_find_node_by_name(gic_node, "ppi-partitions");
+	parts_node = of_get_child_by_name(gic_node, "ppi-partitions");
 	if (!parts_node)
 		return;

 	nr_parts = of_get_child_count(parts_node);

 	if (!nr_parts)
-		return;
+		goto out_put_node;

 	parts = kzalloc(sizeof(*parts) * nr_parts, GFP_KERNEL);
 	if (WARN_ON(!parts))
-		return;
+		goto out_put_node;

 	for_each_child_of_node(parts_node, child_part) {
 		struct partition_affinity *part;
@@ -1100,6 +1100,9 @@ static void __init gic_populate_ppi_partitions(struct device_node *gic_node)

 		gic_data.ppi_descs[i] = desc;
 	}
+
+out_put_node:
+	of_node_put(parts_node);
 }

 static void __init gic_of_setup_kvm_info(struct device_node *node)
@@ -404,6 +404,7 @@ long bch_bucket_alloc(struct cache *ca, unsigned reserve, bool wait)

 	finish_wait(&ca->set->bucket_wait, &w);
 out:
+	if (ca->alloc_thread)
 		wake_up_process(ca->alloc_thread);

 	trace_bcache_alloc(ca, reserve);
@@ -476,7 +477,7 @@ int __bch_bucket_alloc_set(struct cache_set *c, unsigned reserve,
 		if (b == -1)
 			goto err;

-		k->ptr[i] = PTR(ca->buckets[b].gen,
+		k->ptr[i] = MAKE_PTR(ca->buckets[b].gen,
 				bucket_to_sector(c, b),
 				ca->sb.nr_this_dev);

@@ -584,7 +584,7 @@ static bool bch_extent_merge(struct btree_keys *bk, struct bkey *l, struct bkey
 		return false;

 	for (i = 0; i < KEY_PTRS(l); i++)
-		if (l->ptr[i] + PTR(0, KEY_SIZE(l), 0) != r->ptr[i] ||
+		if (l->ptr[i] + MAKE_PTR(0, KEY_SIZE(l), 0) != r->ptr[i] ||
 		    PTR_BUCKET_NR(b->c, l, i) != PTR_BUCKET_NR(b->c, r, i))
 			return false;

@@ -508,7 +508,7 @@ static void journal_reclaim(struct cache_set *c)
 			continue;

 		ja->cur_idx = next;
-		k->ptr[n++] = PTR(0,
+		k->ptr[n++] = MAKE_PTR(0,
 				  bucket_to_sector(c, ca->sb.d[ja->cur_idx]),
 				  ca->sb.nr_this_dev);
 	}
@@ -937,7 +937,8 @@ static void __get_memory_limit(struct dm_bufio_client *c,
 		buffers = c->minimum_buffers;

 	*limit_buffers = buffers;
-	*threshold_buffers = buffers * DM_BUFIO_WRITEBACK_PERCENT / 100;
+	*threshold_buffers = mult_frac(buffers,
+				       DM_BUFIO_WRITEBACK_PERCENT, 100);
 }

 /*
@@ -1856,19 +1857,15 @@ static int __init dm_bufio_init(void)
 	memset(&dm_bufio_caches, 0, sizeof dm_bufio_caches);
 	memset(&dm_bufio_cache_names, 0, sizeof dm_bufio_cache_names);

-	mem = (__u64)((totalram_pages - totalhigh_pages) *
-		      DM_BUFIO_MEMORY_PERCENT / 100) << PAGE_SHIFT;
+	mem = (__u64)mult_frac(totalram_pages - totalhigh_pages,
+			       DM_BUFIO_MEMORY_PERCENT, 100) << PAGE_SHIFT;

 	if (mem > ULONG_MAX)
 		mem = ULONG_MAX;

 #ifdef CONFIG_MMU
-	/*
-	 * Get the size of vmalloc space the same way as VMALLOC_TOTAL
-	 * in fs/proc/internal.h
-	 */
-	if (mem > (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100)
-		mem = (VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100;
+	if (mem > mult_frac(VMALLOC_TOTAL, DM_BUFIO_VMALLOC_PERCENT, 100))
+		mem = mult_frac(VMALLOC_TOTAL, DM_BUFIO_VMALLOC_PERCENT, 100);
 #endif

 	dm_bufio_default_cache_size = mem;
@@ -29,7 +29,6 @@ struct dm_kobject_holder {
 * DM targets must _not_ deference a mapped_device to directly access its members!
 */
 struct mapped_device {
-	struct srcu_struct io_barrier;
 	struct mutex suspend_lock;

 	/*
@@ -127,6 +126,8 @@ struct mapped_device {
 	struct blk_mq_tag_set *tag_set;
 	bool use_blk_mq:1;
 	bool init_tio_pdu:1;
+
+	struct srcu_struct io_barrier;
 };

 void dm_init_md_queue(struct mapped_device *md);
@@ -21,6 +21,7 @@
 #include <linux/delay.h>
 #include <linux/wait.h>
 #include <linux/pr.h>
+#include <linux/vmalloc.h>

 #define DM_MSG_PREFIX "core"

@@ -1511,7 +1512,7 @@ static struct mapped_device *alloc_dev(int minor)
 	struct mapped_device *md;
 	void *old_md;

-	md = kzalloc_node(sizeof(*md), GFP_KERNEL, numa_node_id);
+	md = vzalloc_node(sizeof(*md), numa_node_id);
 	if (!md) {
 		DMWARN("unable to allocate device, out of memory.");
 		return NULL;
@@ -1605,7 +1606,7 @@ bad_io_barrier:
 bad_minor:
 	module_put(THIS_MODULE);
 bad_module_get:
-	kfree(md);
+	kvfree(md);
 	return NULL;
 }

@@ -1624,7 +1625,7 @@ static void free_dev(struct mapped_device *md)
 	free_minor(minor);

 	module_put(THIS_MODULE);
-	kfree(md);
+	kvfree(md);
 }

 static void __bind_mempools(struct mapped_device *md, struct dm_table *t)
@@ -2514,11 +2515,15 @@ struct mapped_device *dm_get_from_kobject(struct kobject *kobj)

 	md = container_of(kobj, struct mapped_device, kobj_holder.kobj);

-	if (test_bit(DMF_FREEING, &md->flags) ||
-	    dm_deleting_md(md))
-		return NULL;
-
+	spin_lock(&_minor_lock);
+	if (test_bit(DMF_FREEING, &md->flags) || dm_deleting_md(md)) {
+		md = NULL;
+		goto out;
+	}
 	dm_get(md);
+out:
+	spin_unlock(&_minor_lock);
+
 	return md;
 }

@@ -286,10 +286,13 @@ static long ir_lirc_ioctl(struct file *filep, unsigned int cmd,
 		if (!dev->max_timeout)
 			return -ENOSYS;

+		/* Check for multiply overflow */
+		if (val > U32_MAX / 1000)
+			return -EINVAL;
+
 		tmp = val * 1000;

-		if (tmp < dev->min_timeout ||
-		    tmp > dev->max_timeout)
+		if (tmp < dev->min_timeout || tmp > dev->max_timeout)
 			return -EINVAL;

 		if (dev->s_timeout)
@@ -101,18 +101,23 @@ static int as102_firmware_upload(struct as10x_bus_adapter_t *bus_adap,
 				 unsigned char *cmd,
 				 const struct firmware *firmware) {

-	struct as10x_fw_pkt_t fw_pkt;
+	struct as10x_fw_pkt_t *fw_pkt;
 	int total_read_bytes = 0, errno = 0;
 	unsigned char addr_has_changed = 0;

+	fw_pkt = kmalloc(sizeof(*fw_pkt), GFP_KERNEL);
+	if (!fw_pkt)
+		return -ENOMEM;
+
+
 	for (total_read_bytes = 0; total_read_bytes < firmware->size; ) {
 		int read_bytes = 0, data_len = 0;

 		/* parse intel hex line */
 		read_bytes = parse_hex_line(
 				(u8 *) (firmware->data + total_read_bytes),
-				fw_pkt.raw.address,
-				fw_pkt.raw.data,
+				fw_pkt->raw.address,
+				fw_pkt->raw.data,
 				&data_len,
 				&addr_has_changed);

@@ -122,28 +127,28 @@ static int as102_firmware_upload(struct as10x_bus_adapter_t *bus_adap,
 		/* detect the end of file */
 		total_read_bytes += read_bytes;
 		if (total_read_bytes == firmware->size) {
-			fw_pkt.u.request[0] = 0x00;
-			fw_pkt.u.request[1] = 0x03;
+			fw_pkt->u.request[0] = 0x00;
+			fw_pkt->u.request[1] = 0x03;

 			/* send EOF command */
 			errno = bus_adap->ops->upload_fw_pkt(bus_adap,
 							     (uint8_t *)
-							     &fw_pkt, 2, 0);
+							     fw_pkt, 2, 0);
 			if (errno < 0)
 				goto error;
 		} else {
 			if (!addr_has_changed) {
 				/* prepare command to send */
-				fw_pkt.u.request[0] = 0x00;
-				fw_pkt.u.request[1] = 0x01;
+				fw_pkt->u.request[0] = 0x00;
+				fw_pkt->u.request[1] = 0x01;

-				data_len += sizeof(fw_pkt.u.request);
-				data_len += sizeof(fw_pkt.raw.address);
+				data_len += sizeof(fw_pkt->u.request);
+				data_len += sizeof(fw_pkt->raw.address);

 				/* send cmd to device */
 				errno = bus_adap->ops->upload_fw_pkt(bus_adap,
 								     (uint8_t *)
-								     &fw_pkt,
+								     fw_pkt,
 								     data_len,
 								     0);
 				if (errno < 0)
@@ -152,6 +157,7 @@ static int as102_firmware_upload(struct as10x_bus_adapter_t *bus_adap,
 		}
 	}
 error:
+	kfree(fw_pkt);
 	return (errno == 0) ? total_read_bytes : errno;
 }

@@ -1622,7 +1622,7 @@ static int cx231xx_usb_probe(struct usb_interface *interface,
 	nr = dev->devno;

 	assoc_desc = udev->actconfig->intf_assoc[0];
-	if (assoc_desc->bFirstInterface != ifnum) {
+	if (!assoc_desc || assoc_desc->bFirstInterface != ifnum) {
 		dev_err(d, "Not found matching IAD interface\n");
 		retval = -ENODEV;
 		goto err_if;
@@ -1219,6 +1219,16 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
 }
 EXPORT_SYMBOL(v4l2_ctrl_fill);

+static u32 user_flags(const struct v4l2_ctrl *ctrl)
+{
+	u32 flags = ctrl->flags;
+
+	if (ctrl->is_ptr)
+		flags |= V4L2_CTRL_FLAG_HAS_PAYLOAD;
+
+	return flags;
+}
+
 static void fill_event(struct v4l2_event *ev, struct v4l2_ctrl *ctrl, u32 changes)
 {
 	memset(ev->reserved, 0, sizeof(ev->reserved));
@@ -1226,7 +1236,7 @@ static void fill_event(struct v4l2_event *ev, struct v4l2_ctrl *ctrl, u32 change
 	ev->id = ctrl->id;
 	ev->u.ctrl.changes = changes;
 	ev->u.ctrl.type = ctrl->type;
-	ev->u.ctrl.flags = ctrl->flags;
+	ev->u.ctrl.flags = user_flags(ctrl);
 	if (ctrl->is_ptr)
 		ev->u.ctrl.value64 = 0;
 	else
@@ -2550,10 +2560,8 @@ int v4l2_query_ext_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_query_ext_ctr
 	else
 		qc->id = ctrl->id;
 	strlcpy(qc->name, ctrl->name, sizeof(qc->name));
-	qc->flags = ctrl->flags;
+	qc->flags = user_flags(ctrl);
 	qc->type = ctrl->type;
-	if (ctrl->is_ptr)
-		qc->flags |= V4L2_CTRL_FLAG_HAS_PAYLOAD;
 	qc->elem_size = ctrl->elem_size;
 	qc->elems = ctrl->elems;
 	qc->nr_of_dims = ctrl->nr_of_dims;
@@ -701,6 +701,7 @@ static struct twl4030_ins omap3_wrst_seq[] = {
 	TWL_RESOURCE_RESET(RES_MAIN_REF),
 	TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R2),
 	TWL_RESOURCE_RESET(RES_VUSB_3V1),
+	TWL_RESOURCE_RESET(RES_VMMC1),
 	TWL_RESOURCE_GROUP_RESET(RES_GRP_ALL, RES_TYPE_R0, RES_TYPE2_R1),
 	TWL_RESOURCE_GROUP_RESET(RES_GRP_RC, RES_TYPE_ALL, RES_TYPE2_R0),
 	TWL_RESOURCE_ON(RES_RESET),
@@ -365,7 +365,8 @@ static ssize_t at24_eeprom_read_mac(struct at24_data *at24, char *buf,
 	memset(msg, 0, sizeof(msg));
 	msg[0].addr = client->addr;
 	msg[0].buf = addrbuf;
-	addrbuf[0] = 0x90 + offset;
+	/* EUI-48 starts from 0x9a, EUI-64 from 0x98 */
+	addrbuf[0] = 0xa0 - at24->chip.byte_len + offset;
 	msg[0].len = 1;
 	msg[1].addr = client->addr;
 	msg[1].flags = I2C_M_RD;
@@ -506,6 +507,9 @@ static int at24_read(void *priv, unsigned int off, void *val, size_t count)
 	if (unlikely(!count))
 		return count;

+	if (off + count > at24->chip.byte_len)
+		return -EINVAL;
+
 	/*
 	 * Read data from chip, protecting against concurrent updates
 	 * from this host, but not from other I2C masters.
@@ -538,6 +542,9 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count)
 	if (unlikely(!count))
 		return -EINVAL;

+	if (off + count > at24->chip.byte_len)
+		return -EINVAL;
+
 	/*
 	 * Write data to chip, protecting against concurrent updates
 	 * from this host, but not from other I2C masters.
@@ -638,6 +645,16 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		dev_warn(&client->dev,
 			"page_size looks suspicious (no power of 2)!\n");

+	/*
+	 * REVISIT: the size of the EUI-48 byte array is 6 in at24mac402, while
+	 * the call to ilog2() in AT24_DEVICE_MAGIC() rounds it down to 4.
+	 *
+	 * Eventually we'll get rid of the magic values altoghether in favor of
+	 * real structs, but for now just manually set the right size.
+	 */
+	if (chip.flags & AT24_FLAG_MAC && chip.byte_len == 4)
+		chip.byte_len = 6;
+
 	/* Use I2C operations unless we're stuck with SMBus extensions. */
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
 		if (chip.flags & AT24_FLAG_ADDR16)
@@ -155,6 +155,9 @@ static int mmc_bus_suspend(struct device *dev)
 		return ret;

 	ret = host->bus_ops->suspend(host);
+	if (ret)
+		pm_generic_resume(dev);
+
 	return ret;
 }

@@ -763,7 +763,7 @@ MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
 MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size);
 MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
 MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
-MMC_DEV_ATTR(ocr, "%08x\n", card->ocr);
+MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr);

 static ssize_t mmc_fwrev_show(struct device *dev,
 			      struct device_attribute *attr,
@@ -683,7 +683,7 @@ MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
 MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
 MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
 MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
-MMC_DEV_ATTR(ocr, "%08x\n", card->ocr);
+MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr);


 static ssize_t mmc_dsr_show(struct device *dev,
@@ -116,6 +116,11 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
 		op = ECC_DECODE;
 		dec = readw(ecc->regs + ECC_DECDONE);
 		if (dec & ecc->sectors) {
+			/*
+			 * Clear decode IRQ status once again to ensure that
+			 * there will be no extra IRQ.
+			 */
+			readw(ecc->regs + ECC_DECIRQ_STA);
 			ecc->sectors = 0;
 			complete(&ecc->done);
 		} else {
@@ -131,8 +136,6 @@ static irqreturn_t mtk_ecc_irq(int irq, void *id)
 		}
 	}

-	writel(0, ecc->regs + ECC_IRQ_REG(op));
-
 	return IRQ_HANDLED;
 }

@@ -342,6 +345,12 @@ void mtk_ecc_disable(struct mtk_ecc *ecc)

 	/* disable it */
 	mtk_ecc_wait_idle(ecc, op);
+	if (op == ECC_DECODE)
+		/*
+		 * Clear decode IRQ status in case there is a timeout to wait
+		 * decode IRQ.
+		 */
+		readw(ecc->regs + ECC_DECIRQ_STA);
 	writew(0, ecc->regs + ECC_IRQ_REG(op));
 	writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op));

@@ -2935,15 +2935,18 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 			    size_t *retlen, const uint8_t *buf)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	int chipnr = (int)(to >> chip->chip_shift);
 	struct mtd_oob_ops ops;
 	int ret;

-	/* Wait for the device to get ready */
-	panic_nand_wait(mtd, chip, 400);
-
 	/* Grab the device */
 	panic_nand_get_device(chip, mtd, FL_WRITING);

+	chip->select_chip(mtd, chipnr);
+
+	/* Wait for the device to get ready */
+	panic_nand_wait(mtd, chip, 400);
+
 	memset(&ops, 0, sizeof(ops));
 	ops.len = len;
 	ops.datbuf = (uint8_t *)buf;
@@ -1133,26 +1133,26 @@ static u8  bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
 				0x97, 0x79, 0xe5, 0x24, 0xb5};

 /**
- * omap_calculate_ecc_bch - Generate bytes of ECC bytes
+ * _omap_calculate_ecc_bch - Generate ECC bytes for one sector
 * @mtd:	MTD device structure
 * @dat:	The pointer to data on which ecc is computed
 * @ecc_code:	The ecc_code buffer
+ * @i:		The sector number (for a multi sector page)
 *
- * Support calculating of BCH4/8 ecc vectors for the page
+ * Support calculating of BCH4/8/16 ECC vectors for one sector
+ * within a page. Sector number is in @i.
 */
-static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
-					const u_char *dat, u_char *ecc_calc)
+static int _omap_calculate_ecc_bch(struct mtd_info *mtd,
+				   const u_char *dat, u_char *ecc_calc, int i)
 {
 	struct omap_nand_info *info = mtd_to_omap(mtd);
 	int eccbytes	= info->nand.ecc.bytes;
 	struct gpmc_nand_regs	*gpmc_regs = &info->reg;
 	u8 *ecc_code;
-	unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+	unsigned long bch_val1, bch_val2, bch_val3, bch_val4;
 	u32 val;
-	int i, j;
+	int j;

-	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
-	for (i = 0; i < nsectors; i++) {
 	ecc_code = ecc_calc;
 	switch (info->ecc_opt) {
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
@@ -1231,7 +1231,8 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
 	switch (info->ecc_opt) {
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
 		/* Add constant polynomial to remainder, so that
-			 * ECC of blank pages results in 0x0 on reading back */
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
 		for (j = 0; j < eccbytes; j++)
 			ecc_calc[j] ^= bch4_polynomial[j];
 		break;
@@ -1241,7 +1242,8 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
 		break;
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
 		/* Add constant polynomial to remainder, so that
-			 * ECC of blank pages results in 0x0 on reading back */
+		 * ECC of blank pages results in 0x0 on reading back
+		 */
 		for (j = 0; j < eccbytes; j++)
 			ecc_calc[j] ^= bch8_polynomial[j];
 		break;
@@ -1255,6 +1257,47 @@ static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
 		return -EINVAL;
 	}

+	return 0;
+}
+
+/**
+ * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used
+ * when SW based correction is required as ECC is required for one sector
+ * at a time.
+ */
+static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd,
+				     const u_char *dat, u_char *ecc_calc)
+{
+	return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0);
+}
+
+/**
+ * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors
+ * @mtd:	MTD device structure
+ * @dat:	The pointer to data on which ecc is computed
+ * @ecc_code:	The ecc_code buffer
+ *
+ * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go.
+ */
+static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd,
+					const u_char *dat, u_char *ecc_calc)
+{
+	struct omap_nand_info *info = mtd_to_omap(mtd);
+	int eccbytes = info->nand.ecc.bytes;
+	unsigned long nsectors;
+	int i, ret;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+	for (i = 0; i < nsectors; i++) {
+		ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i);
+		if (ret)
+			return ret;
+
 		ecc_calc += eccbytes;
 	}

@@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	chip->write_buf(mtd, buf, mtd->writesize);

 	/* Update ecc vector from GPMC result registers */
-	chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+	omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]);

 	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
 					 chip->ecc.total);
@@ -1508,6 +1551,72 @@ static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 	return 0;
 }

+/**
+ * omap_write_subpage_bch - BCH hardware ECC based subpage write
+ * @mtd:	mtd info structure
+ * @chip:	nand chip info structure
+ * @offset:	column address of subpage within the page
+ * @data_len:	data length
+ * @buf:	data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * OMAP optimized subpage write method.
+ */
+static int omap_write_subpage_bch(struct mtd_info *mtd,
+				  struct nand_chip *chip, u32 offset,
+				  u32 data_len, const u8 *buf,
+				  int oob_required, int page)
+{
+	u8 *ecc_calc = chip->buffers->ecccalc;
+	int ecc_size      = chip->ecc.size;
+	int ecc_bytes     = chip->ecc.bytes;
+	int ecc_steps     = chip->ecc.steps;
+	u32 start_step = offset / ecc_size;
+	u32 end_step   = (offset + data_len - 1) / ecc_size;
+	int step, ret = 0;
+
+	/*
+	 * Write entire page at one go as it would be optimal
+	 * as ECC is calculated by hardware.
+	 * ECC is calculated for all subpages but we choose
+	 * only what we want.
+	 */
+
+	/* Enable GPMC ECC engine */
+	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+	/* Write data */
+	chip->write_buf(mtd, buf, mtd->writesize);
+
+	for (step = 0; step < ecc_steps; step++) {
+		/* mask ECC of un-touched subpages by padding 0xFF */
+		if (step < start_step || step > end_step)
+			memset(ecc_calc, 0xff, ecc_bytes);
+		else
+			ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step);
+
+		if (ret)
+			return ret;
+
+		buf += ecc_size;
+		ecc_calc += ecc_bytes;
+	}
+
+	/* copy calculated ECC for whole page to chip->buffer->oob */
+	/* this include masked-value(0xFF) for unwritten subpages */
+	ecc_calc = chip->buffers->ecccalc;
+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
+					 chip->ecc.total);
+	if (ret)
+		return ret;
+
+	/* write OOB buffer to NAND device */
+	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+	return 0;
+}
+
 /**
 * omap_read_page_bch - BCH ecc based page read function for entire page
 * @mtd:		mtd info structure
@@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
 		       chip->ecc.total);

 	/* Calculate ecc bytes */
-	chip->ecc.calculate(mtd, buf, ecc_calc);
+	omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc);

 	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
 					 chip->ecc.total);
@@ -2044,7 +2153,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
 		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
@@ -2066,9 +2175,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 4;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;

@@ -2087,7 +2196,7 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= nand_bch_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
+		nand_chip->ecc.calculate	= omap_calculate_ecc_bch_sw;
 		mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops);
 		/* Reserve one byte for the OMAP marker */
 		oobbytes_per_step		= nand_chip->ecc.bytes + 1;
@@ -2109,9 +2218,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 8;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;

@@ -2131,9 +2240,9 @@ static int omap_nand_probe(struct platform_device *pdev)
 		nand_chip->ecc.strength		= 16;
 		nand_chip->ecc.hwctl		= omap_enable_hwecc_bch;
 		nand_chip->ecc.correct		= omap_elm_correct_data;
-		nand_chip->ecc.calculate	= omap_calculate_ecc_bch;
 		nand_chip->ecc.read_page	= omap_read_page_bch;
 		nand_chip->ecc.write_page	= omap_write_page_bch;
+		nand_chip->ecc.write_subpage	= omap_write_subpage_bch;
 		mtd_set_ooblayout(mtd, &omap_ooblayout_ops);
 		oobbytes_per_step		= nand_chip->ecc.bytes;

@@ -2366,9 +2366,9 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * 4) Get the hardware address.
 	 * 5) Put the card to sleep.
 	 */
-	if (typhoon_reset(ioaddr, WaitSleep) < 0) {
+	err = typhoon_reset(ioaddr, WaitSleep);
+	if (err < 0) {
 		err_msg = "could not reset 3XP";
-		err = -EIO;
 		goto error_out_dma;
 	}

@@ -2382,16 +2382,16 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	typhoon_init_interface(tp);
 	typhoon_init_rings(tp);

-	if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
+	err = typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST);
+	if (err < 0) {
 		err_msg = "cannot boot 3XP sleep image";
-		err = -EIO;
 		goto error_out_reset;
 	}

 	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
-	if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp);
+	if (err < 0) {
 		err_msg = "cannot read MAC address";
-		err = -EIO;
 		goto error_out_reset;
 	}

@@ -2400,6 +2400,7 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)

 	if (!is_valid_ether_addr(dev->dev_addr)) {
 		err_msg = "Could not obtain valid ethernet address, aborting";
+		err = -EIO;
 		goto error_out_reset;
 	}

@@ -2407,7 +2408,8 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	 * later when we print out the version reported.
 	 */
 	INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
-	if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
+	err = typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp);
+	if (err < 0) {
 		err_msg = "Could not get Sleep Image version";
 		goto error_out_reset;
 	}
@@ -2424,9 +2426,9 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if(xp_resp[0].numDesc != 0)
 		tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;

-	if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
+	err = typhoon_sleep(tp, PCI_D3hot, 0);
+	if (err < 0) {
 		err_msg = "cannot put adapter to sleep";
-		err = -EIO;
 		goto error_out_reset;
 	}

@@ -2449,7 +2451,8 @@ typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	dev->features = dev->hw_features |
 		NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_RXCSUM;

-	if(register_netdev(dev) < 0) {
+	err = register_netdev(dev);
+	if (err < 0) {
 		err_msg = "unable to register netdev";
 		goto error_out_reset;
 	}
@@ -3800,6 +3800,30 @@ static int hwrm_ring_alloc_send_msg(struct bnxt *bp,
 	return rc;
 }

+static int bnxt_hwrm_set_async_event_cr(struct bnxt *bp, int idx)
+{
+	int rc;
+
+	if (BNXT_PF(bp)) {
+		struct hwrm_func_cfg_input req = {0};
+
+		bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_CFG, -1, -1);
+		req.fid = cpu_to_le16(0xffff);
+		req.enables = cpu_to_le32(FUNC_CFG_REQ_ENABLES_ASYNC_EVENT_CR);
+		req.async_event_cr = cpu_to_le16(idx);
+		rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	} else {
+		struct hwrm_func_vf_cfg_input req = {0};
+
+		bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_FUNC_VF_CFG, -1, -1);
+		req.enables =
+			cpu_to_le32(FUNC_VF_CFG_REQ_ENABLES_ASYNC_EVENT_CR);
+		req.async_event_cr = cpu_to_le16(idx);
+		rc = hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	}
+	return rc;
+}
+
 static int bnxt_hwrm_ring_alloc(struct bnxt *bp)
 {
 	int i, rc = 0;
@@ -3816,6 +3840,12 @@ static int bnxt_hwrm_ring_alloc(struct bnxt *bp)
 			goto err_out;
 		BNXT_CP_DB(cpr->cp_doorbell, cpr->cp_raw_cons);
 		bp->grp_info[i].cp_fw_ring_id = ring->fw_ring_id;
+
+		if (!i) {
+			rc = bnxt_hwrm_set_async_event_cr(bp, ring->fw_ring_id);
+			if (rc)
+				netdev_warn(bp->dev, "Failed to set async event completion ring.\n");
+		}
 	}

 	for (i = 0; i < bp->tx_nr_rings; i++) {
@@ -398,6 +398,7 @@
 #define E1000_ICR_LSC           0x00000004 /* Link Status Change */
 #define E1000_ICR_RXSEQ         0x00000008 /* Rx sequence error */
 #define E1000_ICR_RXDMT0        0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXO           0x00000040 /* Receiver Overrun */
 #define E1000_ICR_RXT0          0x00000080 /* Rx timer intr (ring 0) */
 #define E1000_ICR_ECCER         0x00400000 /* Uncorrectable ECC Error */
 /* If this bit asserted, the driver should claim the interrupt */
@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
 *  Checks to see of the link status of the hardware has changed.  If a
 *  change in link status has been detected, then we read the PHY registers
 *  to get the current speed/duplex if link exists.
+ *
+ *  Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link
+ *  up).
 **/
 s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 {
@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	 * Change or Rx Sequence Error interrupt.
 	 */
 	if (!mac->get_link_status)
-		return 0;
+		return 1;

 	/* First we want to see if the MII Status Register reports
 	 * link.  If so, then we want to get the current speed/duplex
@@ -461,12 +464,14 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
 	 * different link partner.
 	 */
 	ret_val = e1000e_config_fc_after_link_up(hw);
-	if (ret_val)
+	if (ret_val) {
 		e_dbg("Error configuring flow control\n");
-
 		return ret_val;
 	}

+	return 1;
+}
+
 /**
 *  e1000e_check_for_fiber_link - Check for link (Fiber)
 *  @hw: pointer to the HW structure
@@ -1905,14 +1905,30 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data)
 	struct net_device *netdev = data;
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	u32 icr;
+	bool enable = true;

-	hw->mac.get_link_status = true;
-
-	/* guard against interrupt when we're going down */
-	if (!test_bit(__E1000_DOWN, &adapter->state)) {
-		mod_timer(&adapter->watchdog_timer, jiffies + 1);
-		ew32(IMS, E1000_IMS_OTHER);
+	icr = er32(ICR);
+	if (icr & E1000_ICR_RXO) {
+		ew32(ICR, E1000_ICR_RXO);
+		enable = false;
+		/* napi poll will re-enable Other, make sure it runs */
+		if (napi_schedule_prep(&adapter->napi)) {
+			adapter->total_rx_bytes = 0;
+			adapter->total_rx_packets = 0;
+			__napi_schedule(&adapter->napi);
 		}
+	}
+	if (icr & E1000_ICR_LSC) {
+		ew32(ICR, E1000_ICR_LSC);
+		hw->mac.get_link_status = true;
+		/* guard against interrupt when we're going down */
+		if (!test_bit(__E1000_DOWN, &adapter->state))
+			mod_timer(&adapter->watchdog_timer, jiffies + 1);
+	}
+
+	if (enable && !test_bit(__E1000_DOWN, &adapter->state))
+		ew32(IMS, E1000_IMS_OTHER);

 	return IRQ_HANDLED;
 }
@@ -2683,7 +2699,8 @@ static int e1000e_poll(struct napi_struct *napi, int weight)
 		napi_complete_done(napi, work_done);
 		if (!test_bit(__E1000_DOWN, &adapter->state)) {
 			if (adapter->msix_entries)
-				ew32(IMS, adapter->rx_ring->ims_val);
+				ew32(IMS, adapter->rx_ring->ims_val |
+				     E1000_IMS_OTHER);
 			else
 				e1000_irq_enable(adapter);
 		}
@@ -4178,7 +4195,7 @@ static void e1000e_trigger_lsc(struct e1000_adapter *adapter)
 	struct e1000_hw *hw = &adapter->hw;

 	if (adapter->msix_entries)
-		ew32(ICS, E1000_ICS_OTHER);
+		ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER);
 	else
 		ew32(ICS, E1000_ICS_LSC);
 }
@@ -5056,7 +5073,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
 	case e1000_media_type_copper:
 		if (hw->mac.get_link_status) {
 			ret_val = hw->mac.ops.check_for_link(hw);
-			link_active = !hw->mac.get_link_status;
+			link_active = ret_val > 0;
 		} else {
 			link_active = true;
 		}
@@ -5074,7 +5091,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter)
 		break;
 	}

-	if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+	if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
 	    (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
 		/* See e1000_kmrn_lock_loss_workaround_ich8lan() */
 		e_info("Gigabit has been disabled, downgrading speed\n");
@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 	s32 ret_val = 0;
 	u16 i, phy_status;

+	*success = false;
 	for (i = 0; i < iterations; i++) {
 		/* Some PHYs require the MII_BMSR register to be read
 		 * twice due to the link bit being sticky.  No harm doing
@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
 		ret_val = e1e_rphy(hw, MII_BMSR, &phy_status);
 		if (ret_val)
 			break;
-		if (phy_status & BMSR_LSTATUS)
+		if (phy_status & BMSR_LSTATUS) {
+			*success = true;
 			break;
+		}
 		if (usec_interval >= 1000)
 			msleep(usec_interval / 1000);
 		else
 			udelay(usec_interval);
 	}

-	*success = (i < iterations);
-
 	return ret_val;
 }

@@ -1225,7 +1225,7 @@ static bool fm10k_clean_tx_irq(struct fm10k_q_vector *q_vector,
 			break;

 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();

 		/* if DD is not set pending work has not been completed */
 		if (!(eop_desc->flags & FM10K_TXD_FLAG_DONE))
@@ -3604,7 +3604,7 @@ static bool i40e_clean_fdir_tx_irq(struct i40e_ring *tx_ring, int budget)
 			break;

 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();

 		/* if the descriptor isn't done, no work yet to do */
 		if (!(eop_desc->cmd_type_offset_bsz &
--- a/Show More
+++ b/Show More