Changes in 4.9.66
s390: fix transactional execution control register handling
s390/runtime instrumention: fix possible memory corruption
s390/disassembler: add missing end marker for e7 table
s390/disassembler: increase show_code buffer size
ACPI / EC: Fix regression related to triggering source of EC event handling
x86/mm: fix use-after-free of vma during userfaultfd fault
ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
vsock: use new wait API for vsock_stream_sendmsg()
sched: Make resched_cpu() unconditional
lib/mpi: call cond_resched() from mpi_powm() loop
x86/decoder: Add new TEST instruction pattern
x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
arm64: Implement arch-specific pte_access_permitted()
ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
MIPS: ralink: Fix MT7628 pinmux
MIPS: ralink: Fix typo in mt7628 pinmux function
PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF
ALSA: hda: Add Raven PCI ID
dm bufio: fix integer overflow when limiting maximum cache size
dm: allocate struct mapped_device with kvzalloc
MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
dm: fix race between dm_get_from_kobject() and __dm_destroy()
MIPS: Fix odd fp register warnings with MIPS64r2
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
MIPS: Fix an n32 core file generation regset support regression
MIPS: BCM47XX: Fix LED inversion for WRT54GSv1
rt2x00usb: mark device removed when get ENOENT usb error
autofs: don't fail mount for transient error
nilfs2: fix race condition that causes file system corruption
eCryptfs: use after free in ecryptfs_release_messaging()
libceph: don't WARN() if user tries to add invalid key
bcache: check ca->alloc_thread initialized before wake up it
isofs: fix timestamps beyond 2027
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
NFS: Avoid RCU usage in tracepoints
nfsd: deal with revoked delegations appropriately
rtlwifi: rtl8192ee: Fix memory leak when loading firmware
rtlwifi: fix uninitialized rtlhal->last_suspend_sec time
ata: fixes kernel crash while tracing ata_eh_link_autopsy event
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ALSA: pcm: update tstamp only if audio_tstamp changed
ALSA: usb-audio: Add sanity checks to FE parser
ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
ALSA: usb-audio: Add sanity checks in v2 clock parsers
ALSA: timer: Remove kernel warning at compat ioctl error paths
ALSA: hda: Fix too short HDMI/DP chmap reporting
ALSA: hda/realtek - Fix ALC700 family no sound issue
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
fs/9p: Compare qid.path in v9fs_test_inode
iscsi-target: Fix non-immediate TMR reference leak
target: Fix QUEUE_FULL + SCSI task attribute handling
mtd: nand: omap2: Fix subpage write
mtd: nand: Fix writing mtdoops to nand flash.
mtd: nand: mtk: fix infinite ECC decode IRQ issue
p54: don't unregister leds when they are not initialized
block: Fix a race between blk_cleanup_queue() and timeout handling
irqchip/gic-v3: Fix ppi-partitions lookup
lockd: double unregister of inetaddr notifiers
KVM: nVMX: set IDTR and GDTR limits when loading L1 host state
KVM: SVM: obey guest PAT
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
clk: ti: dra7-atl-clock: fix child-node lookups
libnvdimm, pfn: make 'resource' attribute only readable by root
libnvdimm, namespace: fix label initialization to use valid seq numbers
libnvdimm, namespace: make 'resource' attribute only readable by root
IB/srpt: Do not accept invalid initiator port names
IB/srp: Avoid that a cable pull can trigger a kernel crash
NFC: fix device-allocation error return
i40e: Use smp_rmb rather than read_barrier_depends
igb: Use smp_rmb rather than read_barrier_depends
igbvf: Use smp_rmb rather than read_barrier_depends
ixgbevf: Use smp_rmb rather than read_barrier_depends
i40evf: Use smp_rmb rather than read_barrier_depends
fm10k: Use smp_rmb rather than read_barrier_depends
ixgbe: Fix skb list corruption on Power systems
parisc: Fix validity check of pointer size argument in new CAS implementation
powerpc/signal: Properly handle return value from uprobe_deny_signal()
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: rc: check for integer overflow
cx231xx-cards: fix NULL-deref on missing association descriptor
media: v4l2-ctrl: Fix flags field on Control events
sched/rt: Simplify the IPI based RT balancing logic
fscrypt: lock mutex before checking for bounce page pool
net/9p: Switch to wait_event_killable()
PM / OPP: Add missing of_node_put(np)
Revert "drm/i915: Do not rely on wm preservation for ILK watermarks"
e1000e: Fix error path in link detection
e1000e: Fix return value test
e1000e: Separate signaling for link check/link up
e1000e: Avoid receiver overrun interrupt bursts
RDS: make message size limit compliant with spec
RDS: RDMA: return appropriate error on rdma map failures
RDS: RDMA: fix the ib_map_mr_sg_zbva() argument
PCI: Apply _HPX settings only to relevant devices
drm/sun4i: Fix a return value in case of error
clk: sunxi-ng: A31: Fix spdif clock register
clk: sunxi-ng: fix PLL_CPUX adjusting on A33
dmaengine: zx: set DMA_CYCLIC cap_mask bit
fscrypt: use ENOKEY when file cannot be created w/o key
fscrypt: use ENOTDIR when setting encryption policy on nondirectory
net: Allow IP_MULTICAST_IF to set index to L3 slave
net: 3com: typhoon: typhoon_init_one: make return values more specific
net: 3com: typhoon: typhoon_init_one: fix incorrect return values
drm/armada: Fix compile fail
rt2800: set minimum MPDU and PSDU lengths to sane values
adm80211: return an error if adm8211_alloc_rings() fails
mwifiex: sdio: fix use after free issue for save_adapter
ath10k: fix incorrect txpower set by P2P_DEVICE interface
ath10k: ignore configuring the incorrect board_id
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
pinctrl: sirf: atlas7: Add missing 'of_node_put()'
bnxt_en: Set default completion ring for async events.
ath10k: set CTS protection VDEV param only if VDEV is up
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
gpio: mockup: dynamically allocate memory for chip name
drm: Apply range restriction after color adjustment when allocation
clk: qcom: ipq4019: Add all the frequencies for apss cpu
drm/mediatek: don't use drm_put_dev
mac80211: Remove invalid flag operations in mesh TSF synchronization
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
adm80211: add checks for dma mapping errors
iio: light: fix improper return value
staging: iio: cdc: fix improper return value
spi: SPI_FSL_DSPI should depend on HAS_DMA
netfilter: nft_queue: use raw_smp_processor_id()
netfilter: nf_tables: fix oob access
ASoC: rsnd: don't double free kctrl
crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
s390/kbuild: enable modversions for symbols exported from asm
cec: when canceling a message, don't overwrite old status info
cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
cec: update log_addr[] before finishing configuration
nvmet: fix KATO offset in Set Features
xen: xenbus driver must not accept invalid transaction ids
Linux 4.9.66
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.9.52
SUNRPC: Refactor svc_set_num_threads()
NFSv4: Fix callback server shutdown
mm: prevent double decrease of nr_reserved_highatomic
orangefs: Don't clear SGID when inheriting ACLs
IB/{qib, hfi1}: Avoid flow control testing for RDMA write operation
drm/sun4i: Implement drm_driver lastclose to restore fbdev console
IB/addr: Fix setting source address in addr6_resolve()
tty: improve tty_insert_flip_char() fast path
tty: improve tty_insert_flip_char() slow path
tty: fix __tty_insert_flip_char regression
pinctrl/amd: save pin registers over suspend/resume
Input: i8042 - add Gigabyte P57 to the keyboard reset table
MIPS: math-emu: <MAX|MAXA|MIN|MINA>.<D|S>: Fix quiet NaN propagation
MIPS: math-emu: <MAX|MAXA|MIN|MINA>.<D|S>: Fix cases of both inputs zero
MIPS: math-emu: <MAX|MIN>.<D|S>: Fix cases of both inputs negative
MIPS: math-emu: <MAXA|MINA>.<D|S>: Fix cases of input values with opposite signs
MIPS: math-emu: <MAXA|MINA>.<D|S>: Fix cases of both infinite inputs
MIPS: math-emu: MINA.<D|S>: Fix some cases of infinity and zero inputs
MIPS: math-emu: Handle zero accumulator case in MADDF and MSUBF separately
MIPS: math-emu: <MADDF|MSUBF>.<D|S>: Fix NaN propagation
MIPS: math-emu: <MADDF|MSUBF>.<D|S>: Fix some cases of infinite inputs
MIPS: math-emu: <MADDF|MSUBF>.<D|S>: Fix some cases of zero inputs
MIPS: math-emu: <MADDF|MSUBF>.<D|S>: Clean up "maddf_flags" enumeration
MIPS: math-emu: <MADDF|MSUBF>.S: Fix accuracy (32-bit case)
MIPS: math-emu: <MADDF|MSUBF>.D: Fix accuracy (64-bit case)
crypto: ccp - Fix XTS-AES-128 support on v5 CCPs
crypto: AF_ALG - remove SGL terminator indicator when chaining
ext4: fix incorrect quotaoff if the quota feature is enabled
ext4: fix quota inconsistency during orphan cleanup for read-only mounts
powerpc: Fix DAR reporting when alignment handler faults
block: Relax a check in blk_start_queue()
md/bitmap: disable bitmap_resize for file-backed bitmaps.
skd: Avoid that module unloading triggers a use-after-free
skd: Submit requests to firmware before triggering the doorbell
scsi: zfcp: fix queuecommand for scsi_eh commands when DIX enabled
scsi: zfcp: add handling for FCP_RESID_OVER to the fcp ingress path
scsi: zfcp: fix capping of unsuccessful GPN_FT SAN response trace records
scsi: zfcp: fix passing fsf_req to SCSI trace on TMF to correlate with HBA
scsi: zfcp: fix missing trace records for early returns in TMF eh handlers
scsi: zfcp: fix payload with full FCP_RSP IU in SCSI trace records
scsi: zfcp: trace HBA FSF response by default on dismiss or timedout late response
scsi: zfcp: trace high part of "new" 64 bit SCSI LUN
scsi: megaraid_sas: set minimum value of resetwaittime to be 1 secs
scsi: megaraid_sas: Check valid aen class range to avoid kernel panic
scsi: megaraid_sas: Return pended IOCTLs with cmd_status MFI_STAT_WRONG_STATE in case adapter is dead
scsi: storvsc: fix memory leak on ring buffer busy
scsi: sg: remove 'save_scat_len'
scsi: sg: use standard lists for sg_requests
scsi: sg: off by one in sg_ioctl()
scsi: sg: factor out sg_fill_request_table()
scsi: sg: fixup infoleak when using SG_GET_REQUEST_TABLE
scsi: qla2xxx: Correction to vha->vref_count timeout
scsi: qla2xxx: Fix an integer overflow in sysfs code
ftrace: Fix selftest goto location on error
ftrace: Fix memleak when unregistering dynamic ops when tracing disabled
tracing: Add barrier to trace_printk() buffer nesting modification
tracing: Apply trace_clock changes to instance max buffer
ARC: Re-enable MMU upon Machine Check exception
PCI: shpchp: Enable bridge bus mastering if MSI is enabled
PCI: pciehp: Report power fault only once until we clear it
net/netfilter/nf_conntrack_core: Fix net_conntrack_lock()
s390/mm: fix local TLB flushing vs. detach of an mm address space
s390/mm: fix race on mm->context.flush_mm
media: v4l2-compat-ioctl32: Fix timespec conversion
media: uvcvideo: Prevent heap overflow when accessing mapped controls
PM / devfreq: Fix memory leak when fail to register device
bcache: initialize dirty stripes in flash_dev_run()
bcache: Fix leak of bdev reference
bcache: do not subtract sectors_to_gc for bypassed IO
bcache: correct cache_dirty_target in __update_writeback_rate()
bcache: Correct return value for sysfs attach errors
bcache: fix for gc and write-back race
bcache: fix bch_hprint crash and improve output
Linux 4.9.52
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 4ddd56b003f251091a67c15ae3fe4a5c5c5e390a upstream.
Calling blk_start_queue() from interrupt context with the queue
lock held and without disabling IRQs, as the skd driver does, is
safe. This patch avoids that loading the skd driver triggers the
following warning:
WARNING: CPU: 11 PID: 1348 at block/blk-core.c:283 blk_start_queue+0x84/0xa0
RIP: 0010:blk_start_queue+0x84/0xa0
Call Trace:
skd_unquiesce_dev+0x12a/0x1d0 [skd]
skd_complete_internal+0x1e7/0x5a0 [skd]
skd_complete_other+0xc2/0xd0 [skd]
skd_isr_completion_posted.isra.30+0x2a5/0x470 [skd]
skd_isr+0x14f/0x180 [skd]
irq_forced_thread_fn+0x2a/0x70
irq_thread+0x144/0x1a0
kthread+0x125/0x140
ret_from_fork+0x2a/0x40
Fixes: commit a038e25364 ("[PATCH] blk_start_queue() must be called with irq disabled - add warning")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.21:
libceph: force GFP_NOIO for socket allocations
xen/setup: Don't relocate p2m over existing one
xfs: only update mount/resv fields on success in __xfs_ag_resv_init
xfs: use per-AG reservations for the finobt
xfs: pull up iolock from xfs_free_eofblocks()
xfs: sync eofblocks scans under iolock are livelock prone
xfs: fix eofblocks race with file extending async dio writes
xfs: fix toctou race when locking an inode to access the data map
xfs: fail _dir_open when readahead fails
xfs: filter out obviously bad btree pointers
xfs: check for obviously bad level values in the bmbt root
xfs: verify free block header fields
xfs: allow unwritten extents in the CoW fork
xfs: mark speculative prealloc CoW fork extents unwritten
xfs: reset b_first_retry_time when clear the retry status of xfs_buf_t
xfs: update ctime and mtime on clone destinatation inodes
xfs: reject all unaligned direct writes to reflinked files
xfs: don't fail xfs_extent_busy allocation
xfs: handle indlen shortage on delalloc extent merge
xfs: split indlen reservations fairly when under reserved
xfs: fix uninitialized variable in _reflink_convert_cow
xfs: don't reserve blocks for right shift transactions
xfs: Use xfs_icluster_size_fsb() to calculate inode chunk alignment
xfs: tune down agno asserts in the bmap code
xfs: only reclaim unwritten COW extents periodically
xfs: fix and streamline error handling in xfs_end_io
xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask
xfs: use iomap new flag for newly allocated delalloc blocks
xfs: try any AG when allocating the first btree block when reflinking
scsi: sg: check length passed to SG_NEXT_CMD_LEN
scsi: libsas: fix ata xfer length
scsi: scsi_dh_alua: Check scsi_device_get() return value
scsi: scsi_dh_alua: Ensure that alua_activate() calls the completion function
PCI: iproc: Save host bridge window resource in struct iproc_pcie
ALSA: seq: Fix race during FIFO resize
ALSA: hda - fix a problem for lineout on a Dell AIO machine
ASoC: atmel-classd: fix audio clock rate
ASoC: Intel: Skylake: fix invalid memory access due to wrong reference of pointer
HID: wacom: Don't add ghost interface as shared data
mmc: sdhci: Disable runtime pm when the sdio_irq is enabled
mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection
NFSv4.1 fix infinite loop on IO BAD_STATEID error
nfsd: map the ENOKEY to nfserr_perm for avoiding warning
parisc: Clean up fixup routines for get_user()/put_user()
parisc: Avoid stalled CPU warnings after system shutdown
parisc: Fix access fault handling in pa_memcpy()
ACPI: Fix incompatibility with mcount-based function graph tracing
ACPI: Do not create a platform_device for IOAPIC/IOxAPIC
tty/serial: atmel: fix race condition (TX+DMA)
tty/serial: atmel: fix TX path in atmel_console_write()
USB: fix linked-list corruption in rh_call_control()
serial: mxs-auart: Fix baudrate calculation
KVM: x86: clear bus pointer when destroyed
KVM: kvm_io_bus_unregister_dev() should never fail
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
drm/etnaviv: (re-)protect fence allocation with GPU mutex
x86/mm/KASLR: Exclude EFI region from KASLR VA space randomization
x86/mce: Fix copy/paste error in exception table entries
lib/syscall: Clear return values when no stack
mm: rmap: fix huge file mmap accounting in the memcg stats
mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
ARM: BCM5301X: Add back handler ignoring external imprecise aborts
qla2xxx: Allow vref count to timeout on vport delete.
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
MIPS: Lantiq: Fix cascaded IRQ setup
mm: workingset: fix premature shadow node shrinking with cgroups
blk: improve order of bio handling in generic_make_request()
blk: Ensure users for current->bio_list can see the full list.
padata: avoid race in reordering
nvme/core: Fix race kicking freed request_queue
nvme/pci: Disable on removal when disconnected
Linux 4.9.21
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit f5fe1b51905df7cfe4fdfd85c5fb7bc5b71a094f upstream.
Commit 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
changed current->bio_list so that it did not contain *all* of the
queued bios, but only those submitted by the currently running
make_request_fn.
There are two places which walk the list and requeue selected bios,
and others that check if the list is empty. These are no longer
correct.
So redefine current->bio_list to point to an array of two lists, which
contain all queued bios, and adjust various code to test or walk both
lists.
Signed-off-by: NeilBrown <neilb@suse.com>
Fixes: 79bd99596b73 ("blk: improve order of bio handling in generic_make_request()")
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79bd99596b7305ab08109a8bf44a6a4511dbf1cd upstream.
To avoid recursion on the kernel stack when stacked block devices
are in use, generic_make_request() will, when called recursively,
queue new requests for later handling. They will be handled when the
make_request_fn for the current bio completes.
If any bios are submitted by a make_request_fn, these will ultimately
be handled seqeuntially. If the handling of one of those generates
further requests, they will be added to the end of the queue.
This strict first-in-first-out behaviour can lead to deadlocks in
various ways, normally because a request might need to wait for a
previous request to the same device to complete. This can happen when
they share a mempool, and can happen due to interdependencies
particular to the device. Both md and dm have examples where this happens.
These deadlocks can be erradicated by more selective ordering of bios.
Specifically by handling them in depth-first order. That is: when the
handling of one bio generates one or more further bios, they are
handled immediately after the parent, before any siblings of the
parent. That way, when generic_make_request() calls make_request_fn
for some particular device, we can be certain that all previously
submited requests for that device have been completely handled and are
not waiting for anything in the queue of requests maintained in
generic_make_request().
An easy way to achieve this would be to use a last-in-first-out stack
instead of a queue. However this will change the order of consecutive
bios submitted by a make_request_fn, which could have unexpected consequences.
Instead we take a slightly more complex approach.
A fresh queue is created for each call to a make_request_fn. After it completes,
any bios for a different device are placed on the front of the main queue, followed
by any bios for the same device, followed by all bios that were already on
the queue before the make_request_fn was called.
This provides the depth-first approach without reordering bios on the same level.
This, by itself, it not enough to remove all deadlocks. It just makes
it possible for drivers to take the extra step required themselves.
To avoid deadlocks, drivers must never risk waiting for a request
after submitting one to generic_make_request. This includes never
allocing from a mempool twice in the one call to a make_request_fn.
A common pattern in drivers is to call bio_split() in a loop, handling
the first part and then looping around to possibly split the next part.
Instead, a driver that finds it needs to split a bio should queue
(with generic_make_request) the second part, handle the first part,
and then return. The new code in generic_make_request will ensure the
requests to underlying bios are processed first, then the second bio
that was split off. If it splits again, the same process happens. In
each case one bio will be completely handled before the next one is attempted.
With this is place, it should be possible to disable the
punt_bios_to_recover() recovery thread for many block devices, and
eventually it may be possible to remove it completely.
Ref: http://www.spinics.net/lists/raid/msg54680.html
Tested-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Inspired-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Cc: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds a new sysfs node (latency_hist) and reports
IO (svc time) latency histograms. Disabled by default, can be
enabled by echoing 0 into latency_hist, stats can be cleared
by writing 2 into latency_hist. This commit fixes the 32 bit
build breakage in the previous commit. Tested on both 32 bit
and 64 bit arm devices. (Merged from android4.4-common).
Bug: 30677035
Change-Id: I9403ea093f4cd54ebae08f12a11d01ef153118d0
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
In order to help determine the effectiveness of polling in a running
system it is usful to determine the ratio of how often the poll
function is called vs how often the completion is checked. For this
reason we add a poll_considered variable and add it to the sysfs entry
for io_poll.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_set_queue_dying() can be called while another thread is
submitting I/O or changing queue flags, e.g. through dm_stop_queue().
Hence protect the QUEUE_FLAG_DYING flag change with locking.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since commit 63a4cc2486, bio->bi_rw contains flags in the lower
portion and the op code in the higher portions. This means that
old code that relies on manually setting bi_rw is most likely
going to be broken. Instead of letting that brokeness linger,
rename the member, to force old and out-of-tree code to break
at compile time instead of at runtime.
No intended functional changes in this commit.
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver updates from Jens Axboe:
"This branch also contains core changes. I've come to the conclusion
that from 4.9 and forward, I'll be doing just a single branch. We
often have dependencies between core and drivers, and it's hard to
always split them up appropriately without pulling core into drivers
when that happens.
That said, this contains:
- separate secure erase type for the core block layer, from
Christoph.
- set of discard fixes, from Christoph.
- bio shrinking fixes from Christoph, as a followup up to the
op/flags change in the core branch.
- map and append request fixes from Christoph.
- NVMeF (NVMe over Fabrics) code from Christoph. This is pretty
exciting!
- nvme-loop fixes from Arnd.
- removal of ->driverfs_dev from Dan, after providing a
device_add_disk() helper.
- bcache fixes from Bhaktipriya and Yijing.
- cdrom subchannel read fix from Vchannaiah.
- set of lightnvm updates from Wenwei, Matias, Johannes, and Javier.
- set of drbd updates and fixes from Fabian, Lars, and Philipp.
- mg_disk error path fix from Bart.
- user notification for failed device add for loop, from Minfei.
- NVMe in general:
+ NVMe delay quirk from Guilherme.
+ SR-IOV support and command retry limits from Keith.
+ fix for memory-less NUMA node from Masayoshi.
+ use UINT_MAX for discard sectors, from Minfei.
+ cancel IO fixes from Ming.
+ don't allocate unused major, from Neil.
+ error code fixup from Dan.
+ use constants for PSDT/FUSE from James.
+ variable init fix from Jay.
+ fabrics fixes from Ming, Sagi, and Wei.
+ various fixes"
* 'for-4.8/drivers' of git://git.kernel.dk/linux-block: (115 commits)
nvme/pci: Provide SR-IOV support
nvme: initialize variable before logical OR'ing it
block: unexport various bio mapping helpers
scsi/osd: open code blk_make_request
target: stop using blk_make_request
block: simplify and export blk_rq_append_bio
block: ensure bios return from blk_get_request are properly initialized
virtio_blk: use blk_rq_map_kern
memstick: don't allow REQ_TYPE_BLOCK_PC requests
block: shrink bio size again
block: simplify and cleanup bvec pool handling
block: get rid of bio_rw and READA
block: don't ignore -EOPNOTSUPP blkdev_issue_write_same
block: introduce BLKDEV_DISCARD_ZERO to fix zeroout
NVMe: don't allocate unused nvme_major
nvme: avoid crashes when node 0 is memoryless node.
nvme: Limit command retries
loop: Make user notify for adding loop device failed
nvme-loop: fix nvme-loop Kconfig dependencies
nvmet: fix return value check in nvmet_subsys_alloc()
...
I wish the OSD code could simply use blk_rq_map_* helpers like
everyone else, but the complex nature of deciding if we have
DATA IN and/or DATA OUT buffers might make this impossible
(at least for a mere human like me).
But using blk_rq_append_bio at least allows sharing the setup code
between request with or without dat a buffers, and given that this
is the last user of blk_make_request it allows getting rid of that
somewhat awkward interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Boaz Harrosh <ooo@electrozaur.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The target SCSI passthrough backend is much better served with the low-level
blk_rq_append_bio construct then the helpers built on top of it, so export it.
Also use the opportunity to remove the pointless request_queue argument and
make the code flow a little more readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_get_request is used for BLOCK_PC and similar passthrough requests.
Currently we always need to call blk_rq_set_block_pc or an open coded
version of it to allow appending bios using the request mapping helpers
later on, which is a somewhat awkward API. Instead move the
initialization part of blk_rq_set_block_pc into blk_get_request, so that
we always have a safe to use request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The new NVMe over fabrics target will make use of this outside from a
module.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of overloading the discard support with the REQ_SECURE flag.
Use the opportunity to rename the queue flag as well, and remove the
dead checks for this flag in the RAID 1 and RAID 10 drivers that don't
claim support for secure erase.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
To avoid confusion between REQ_OP_FLUSH, which is handled by
request_fn drivers, and upper layers requesting the block layer
perform a flush sequence along with possibly a WRITE, this patch
renames REQ_FLUSH to REQ_PREFLUSH.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We don't need bi_rw to be so large on 64 bit archs, so
reduce it to unsigned int.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the is_sync helpers to use separate variables
for the operation and flags.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the block layer merging code to use separate variables
for the operation and flags, and to check req_op for the REQ_OP.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the elevator code to use separate variables
for the operation and flags, and to check req_op for the REQ_OP.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch prepares *_get_request/*_put_request and freed_request,
to use separate variables for the operation and flags. In the
next patches the struct request users will be converted like
was done for bios where the op and flags are set separately.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The bio users should now always be setting up the bio op. This patch
has the block layer copy that to the request.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We currently set REQ_WRITE/WRITE for all non READ IOs
like discard, flush, writesame, etc. In the next patches where we
no longer set up the op as a bitmap, we will not be able to
detect a operation direction like writesame by testing if REQ_WRITE is
set.
This patch converts the drivers and cgroup to use the
op_is_write helper. This should just cover the simple
cases. I did dm, md and bcache in their own patches
because they were more involved.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that we converted everything to the newer block write cache
interface, kill off the queue flush_flags and queueable flush
entries.
Signed-off-by: Jens Axboe <axboe@fb.com>
We could kmalloc() the payload, so need the offset in page.
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull libata updates from Tejun Heo:
- ahci grew runtime power management support so that the controller can
be turned off if no devices are attached.
- sata_via isn't dead yet. It got hotplug support and more refined
workaround for certain WD drives.
- Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing
conflicts in ahci PCI ID table.
* 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ata: ahci_xgene: dereferencing uninitialized pointer in probe
AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs
ata: sata_rcar: Use ARCH_RENESAS
sata_via: Implement hotplug for VT6421
sata_via: Apply WD workaround only when needed on VT6421
ahci: Add runtime PM support for the host controller
ahci: Add functions to manage runtime PM of AHCI ports
ahci: Convert driver to use modern PM hooks
ahci: Cache host controller version
scsi: Drop runtime PM usage count after host is added
scsi: Set request queue runtime PM status back to active on resume
block: Add blk_set_runtime_active()
ata: ahci_mvebu: add support for Armada 3700 variant
libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show()
libata: support AHCI on OCTEON platform
Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower
than if an underlying null_blk device were used directly. One of the
reasons for this drop in performance is that blk_insert_clone_request()
was calling blk_mq_insert_request() with @async=true. This forced the
use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues
which ushered in ping-ponging between process context (fio in this case)
and kblockd's kworker to submit the cloned request. The ftrace
function_graph tracer showed:
kworker-2013 => fio-12190
fio-12190 => kworker-2013
...
kworker-2013 => fio-12190
fio-12190 => kworker-2013
...
Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to
_not_ use kblockd to submit the cloned requests isn't enough to
eliminate the observed context switches.
In addition to this dm-mq specific blk-core fix, there are 2 DM core
fixes to dm-mq that (when paired with the blk-core fix) completely
eliminate the observed context switching:
1) don't blk_mq_run_hw_queues in blk-mq request completion
Motivated by desire to reduce overhead of dm-mq, punting to kblockd
just increases context switches.
In my testing against a really fast null_blk device there was no benefit
to running blk_mq_run_hw_queues() on completion (and no other blk-mq
driver does this). So hopefully this change doesn't induce the need for
yet another revert like commit 621739b00e !
2) use blk_mq_complete_request() in dm_complete_request()
blk_complete_request() doesn't offer the traditional q->mq_ops vs
.request_fn branching pattern that other historic block interfaces
do (e.g. blk_get_request). Using blk_mq_complete_request() for
blk-mq requests is important for performance. It should be noted
that, like blk_complete_request(), blk_mq_complete_request() doesn't
natively handle partial completions -- but the request-based
DM-multipath target does provide the required partial completion
support by dm.c:end_clone_bio() triggering requeueing of the request
via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE.
dm-mq fix#2 is _much_ more important than #1 for eliminating the
context switches.
Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475
After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472
With these changes multithreaded async read IOPs improved from ~950K
to ~1350K for this dm-mq stacked on null_blk test-case. The raw read
IOPs of the underlying null_blk device for the same workload is ~1950K.
Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()")
Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM")
Cc: stable@vger.kernel.org # 4.1+
Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
If block device is left runtime suspended during system suspend, resume
hook of the driver typically corrects runtime PM status of the device back
to "active" after it is resumed. However, this is not enough as queue's
runtime PM status is still "suspended". As long as it is in this state
blk_pm_peek_request() returns NULL and thus prevents new requests to be
processed.
Add new function blk_set_runtime_active() that can be used to force the
queue status back to "active" as needed.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Tejun Heo <tj@kernel.org>
When a storage device rejects a WRITE SAME command we will disable write
same functionality for the device and return -EREMOTEIO to the block
layer. -EREMOTEIO will in turn prevent DM from retrying the I/O and/or
failing the path.
Yiwen Jiang discovered a small race where WRITE SAME requests issued
simultaneously would cause -EIO to be returned. This happened because
any requests being prepared after WRITE SAME had been disabled for the
device caused us to return BLKPREP_KILL. The latter caused the block
layer to return -EIO upon completion.
To overcome this we introduce BLKPREP_INVALID which indicates that this
is an invalid request for the device. blk_peek_request() is modified to
return -EREMOTEIO in that case.
Reported-by: Yiwen Jiang <jiangyiwen@huawei.com>
Suggested-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Reviewed-by: Ewan Milne <emilne@redhat.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull NVMe updates from Jens Axboe:
"Last branch for this series is the nvme changes. It's in a separate
branch to avoid splitting too much between core and NVMe changes,
since NVMe is still helping drive some blk-mq changes. That said, not
a huge amount of core changes in here. The grunt of the work is the
continued split of the code"
* 'for-4.5/nvme' of git://git.kernel.dk/linux-block: (67 commits)
uapi: update install list after nvme.h rename
NVMe: Export NVMe attributes to sysfs group
NVMe: Shutdown controller only for power-off
NVMe: IO queue deletion re-write
NVMe: Remove queue freezing on resets
NVMe: Use a retryable error code on reset
NVMe: Fix admin queue ring wrap
nvme: make SG_IO support optional
nvme: fixes for NVME_IOCTL_IO_CMD on the char device
nvme: synchronize access to ctrl->namespaces
nvme: Move nvme_freeze/unfreeze_queues to nvme core
PCI/AER: include header file
NVMe: Export namespace attributes to sysfs
NVMe: Add pci error handlers
block: remove REQ_NO_TIMEOUT flag
nvme: merge iod and cmd_info
nvme: meta_sg doesn't have to be an array
nvme: properly free resources for cancelled command
nvme: simplify completion handling
nvme: special case AEN requests
...
Pull core block updates from Jens Axboe:
"We don't have a lot of core changes this time around, it's mostly in
drivers, which will come in a subsequent pull.
The cores changes include:
- blk-mq
- Prep patch from Christoph, changing blk_mq_alloc_request() to
take flags instead of just using gfp_t for sleep/nosleep.
- Doc patch from me, clarifying the difference between legacy
and blk-mq for timer usage.
- Fixes from Raghavendra for memory-less numa nodes, and a reuse
of CPU masks.
- Cleanup from Geliang Tang, using offset_in_page() instead of open
coding it.
- From Ilya, rename request_queue slab to it reflects what it holds,
and a fix for proper use of bdgrab/put.
- A real fix for the split across stripe boundaries from Keith. We
yanked a broken version of this from 4.4-rc final, this one works.
- From Mike Krinkin, emit a trace message when we split.
- From Wei Tang, two small cleanups, not explicitly clearing memory
that is already cleared"
* 'for-4.5/core' of git://git.kernel.dk/linux-block:
block: use bd{grab,put}() instead of open-coding
block: split bios to max possible length
block: add call to split trace point
blk-mq: Avoid memoryless numa node encoded in hctx numa_node
blk-mq: Reuse hardware context cpumask for tags
blk-mq: add a flags parameter to blk_mq_alloc_request
Revert "blk-flush: Queue through IO scheduler when flush not required"
block: clarify blk_add_timer() use case for blk-mq
bio: use offset_in_page macro
block: do not initialise statics to 0 or NULL
block: do not initialise globals to 0 or NULL
block: rename request_queue slab cache
We currently only have an inline/sync helper to restart a stopped
queue. If drivers need an async version, they have to roll their
own. Add a generic helper instead.
Signed-off-by: Jens Axboe <axboe@fb.com>
blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.
Fixes: 54efd50bfd ("block: make generic_make_request handle arbitrarily sized bios")
Cc: stable@vger.kernel.org
Tested-by: Artem S. Tashkinov <t.artem@lycos.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Timer context is not very useful for drivers to perform any meaningful abort
action from. So instead of calling the driver from this useless context
defer it to a workqueue as soon as possible.
Note that while a delayed_work item would seem the right thing here I didn't
dare to use it due to the magic in blk_add_timer that pokes deep into timer
internals. But maybe this encourages Tejun to add a sensible API for that to
the workqueue API and we'll all be fine in the end :)
Contains a major update from Keith Bush:
"This patch removes synchronizing the timeout work so that the timer can
start a freeze on its own queue. The timer enters the queue, so timer
context can only start a freeze, but not wait for frozen."
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The routines in scsi_pm.c assume that if a runtime-PM callback is
invoked for a SCSI device, it can only mean that the device's driver
has asked the block layer to handle the runtime power management (by
calling blk_pm_runtime_init(), which among other things sets q->dev).
However, this assumption turns out to be wrong for things like the ses
driver. Normally ses devices are not allowed to do runtime PM, but
userspace can override this setting. If this happens, the kernel gets
a NULL pointer dereference when blk_post_runtime_resume() tries to use
the uninitialized q->dev pointer.
This patch fixes the problem by checking q->dev in block layer before
handle runtime PM. Since ses doesn't define any PM callbacks and call
blk_pm_runtime_init(), the crash won't occur.
This fixes Bugzilla #101371.
https://bugzilla.kernel.org/show_bug.cgi?id=101371
More discussion can be found from below link.
http://marc.info/?l=linux-scsi&m=144163730531875&w=2
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Xiangliang Yu <Xiangliang.Yu@amd.com>
Cc: James E.J. Bottomley <JBottomley@odin.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Michael Terry <Michael.terry@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@fb.com>
We already have the reserved flag, and a nowait flag awkwardly encoded as
a gfp_t. Add a real flags argument to make the scheme more extensible and
allow for a nicer calling convention.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a cloned request is retried on other queues it always needs
to be checked against the queue limits of that queue.
Otherwise the calculations for nr_phys_segments might be wrong,
leading to a crash in scsi_init_sgtable().
To clarify this the patch renames blk_rq_check_limits()
to blk_cloned_rq_check_limits() and removes the symbol
export, as the new function should only be used for
cloned requests and never exported.
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Ewan Milne <emilne@redhat.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Fixes: e2a60da74 ("block: Clean up special command handling logic")
Cc: stable@vger.kernel.org # 3.7+
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch fixes the checkpatch.pl error to blk-exec.c:
ERROR: do not initialise globals to 0 or NULL
Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Fix kernel-doc warning in blk-core.c:
Warning(..//block/blk-core.c:1549): No description found for parameter 'same_queue_rq'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block IO poll support from Jens Axboe:
"Various groups have been doing experimentation around IO polling for
(really) fast devices. The code has been reviewed and has been
sitting on the side for a few releases, but this is now good enough
for coordinated benchmarking and further experimentation.
Currently O_DIRECT sync read/write are supported. A framework is in
the works that allows scalable stats tracking so we can auto-tune
this. And we'll add libaio support as well soon. Fow now, it's an
opt-in feature for test purposes"
* 'for-4.4/io-poll' of git://git.kernel.dk/linux-block:
direct-io: be sure to assign dio->bio_bdev for both paths
directio: add block polling support
NVMe: add blk polling support
block: add block polling support
blk-mq: return tag/queue combo in the make_request_fn handlers
block: change ->make_request_fn() and users to return a queue cookie
Greg Kroah-Hartman
Bart Van Assche
NeilBrown
Mohan Srinivasan
Stephen Bates
Jens Axboe
Bart Van Assche
Linus Torvalds
Christoph Hellwig
Sagi Grimberg
Mike Christie
Ming Lin
Kirill A. Shutemov
Mike Snitzer
Mika Westerberg
James Bottomley
Martin K. Petersen
Junichi Nomura
Ken Xue
Hannes Reinecke
Wei Tang
Ilya Dryomov
Randy Dunlap