Instead of adding the update_rq_clock() all the way at the bottom of
the callstack, add one at the top, this to aid later effort to
minimize update_rq_lock() calls.
WARNING: CPU: 0 PID: 1 at ../kernel/sched/sched.h:797 detach_task_cfs_rq()
rq->clock_update_flags < RQCF_ACT_SKIP
Call Trace:
dump_stack()
__warn()
warn_slowpath_fmt()
detach_task_cfs_rq()
switched_from_fair()
__sched_setscheduler()
_sched_setscheduler()
sched_set_stop_task()
cpu_stop_create()
__smpboot_create_thread.part.2()
smpboot_register_percpu_thread_cpumask()
cpu_stop_init()
do_one_initcall()
? print_cpu_info()
kernel_init_freeable()
? rest_init()
kernel_init()
ret_from_fork()
Change-Id: Iee08c2ed3303ae8f0c527658f13646b02a412cad
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 80f5c1b84baa8180c3c27b7e227429712cd967b6)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
When using schedfreq on cpus with max capacity significantly smaller than
1024, the tick update uses non-normalised capacities - this leads to
selecting an incorrect OPP as we were scaling the frequency as if the
max capacity achievable was 1024 rather than the max for that particular
cpu or group. This could result in a cpu being stuck at the lowest OPP
and unable to generate enough utilisation to climb out if the max
capacity is significantly smaller than 1024.
Instead, normalize the capacity to be in the range 0-1024 in the tick
so that when we later select a frequency, we get the correct one.
Also comments updated to be clearer about what is needed.
Change-Id: Id84391c7ac015311002ada21813a353ee13bee60
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
(cherry picked from commit bc3b0db024f3d0b323e7d93994655e9e3d9f8d68)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Changes in 4.9.58
MIPS: Fix minimum alignment requirement of IRQ stack
Revert "bsg-lib: don't free job in bsg_prepare_job"
xen-netback: Use GFP_ATOMIC to allocate hash
locking/lockdep: Add nest_lock integrity test
watchdog: kempld: fix gcc-4.3 build
irqchip/crossbar: Fix incorrect type of local variables
initramfs: finish fput() before accessing any binary from initramfs
mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length
ALSA: hda: Add Geminilake HDMI codec ID
qed: Don't use attention PTT for configuring BW
mac80211: fix power saving clients handling in iwlwifi
net/mlx4_en: fix overflow in mlx4_en_init_timestamp()
staging: vchiq_2835_arm: Make cache-line-size a required DT property
netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.
iio: adc: xilinx: Fix error handling
f2fs: do SSR for data when there is enough free space
sched/fair: Update rq clock before changing a task's CPU affinity
Btrfs: send, fix failure to rename top level inode due to name collision
f2fs: do not wait for writeback in write_begin
md/linear: shutup lockdep warnning
sparc64: Migrate hvcons irq to panicked cpu
net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs
crypto: xts - Add ECB dependency
mm/memory_hotplug: set magic number to page->freelist instead of page->lru.next
ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock
slub: do not merge cache if slub_debug contains a never-merge flag
scsi: scsi_dh_emc: return success in clariion_std_inquiry()
ASoC: mediatek: add I2C dependency for CS42XX8
drm/amdgpu: refuse to reserve io mem for split VRAM buffers
net: mvpp2: release reference to txq_cpu[] entry after unmapping
qede: Prevent index problems in loopback test
qed: Reserve doorbell BAR space for present CPUs
qed: Read queue state before releasing buffer
i2c: at91: ensure state is restored after suspending
ceph: don't update_dentry_lease unless we actually got one
ceph: fix bogus endianness change in ceph_ioctl_set_layout
ceph: clean up unsafe d_parent accesses in build_dentry_path
uapi: fix linux/rds.h userspace compilation errors
uapi: fix linux/mroute6.h userspace compilation errors
IB/hfi1: Use static CTLE with Preset 6 for integrated HFIs
IB/hfi1: Allocate context data on memory node
target/iscsi: Fix unsolicited data seq_end_offset calculation
hrtimer: Catch invalid clockids again
nfsd/callback: Cleanup callback cred on shutdown
powerpc/perf: Add restrictions to PMC5 in power9 DD1
drm/nouveau/gr/gf100-: fix ccache error logging
regulator: core: Resolve supplies before disabling unused regulators
btmrvl: avoid double-disable_irq() race
EDAC, mce_amd: Print IPID and Syndrome on a separate line
cpufreq: CPPC: add ACPI_PROCESSOR dependency
usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets
Linux 4.9.58
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit a499c3ead88ccf147fc50689e85a530ad923ce36 ]
This is triggered during boot when CONFIG_SCHED_DEBUG is enabled:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 81 at kernel/sched/sched.h:812 set_next_entity+0x11d/0x380
rq->clock_update_flags < RQCF_ACT_SKIP
CPU: 6 PID: 81 Comm: torture_shuffle Not tainted 4.10.0+ #1
Hardware name: LENOVO ThinkCentre M8500t-N000/SHARKBAY, BIOS FBKTC1AUS 02/16/2016
Call Trace:
dump_stack+0x85/0xc2
__warn+0xcb/0xf0
warn_slowpath_fmt+0x5f/0x80
set_next_entity+0x11d/0x380
set_curr_task_fair+0x2b/0x60
do_set_cpus_allowed+0x139/0x180
__set_cpus_allowed_ptr+0x113/0x260
set_cpus_allowed_ptr+0x10/0x20
torture_shuffle+0xfd/0x180
kthread+0x10f/0x150
? torture_shutdown_init+0x60/0x60
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x31/0x40
---[ end trace dd94d92344cea9c6 ]---
The task is running && !queued, so there is no rq clock update before calling
set_curr_task().
This patch fixes it by updating rq clock after holding rq->lock/pi_lock
just as what other dequeue + put_prev + enqueue + set_curr story does.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1487749975-5994-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.55
USB: gadgetfs: Fix crash caused by inadequate synchronization
USB: gadgetfs: fix copy_to_user while holding spinlock
usb: gadget: udc: atmel: set vbus irqflags explicitly
usb: gadget: udc: renesas_usb3: fix for no-data control transfer
usb: gadget: udc: renesas_usb3: fix Pn_RAMMAP.Pn_MPKT value
usb: gadget: udc: renesas_usb3: Fix return value of usb3_write_pipe()
usb-storage: unusual_devs entry to fix write-access regression for Seagate external drives
usb-storage: fix bogus hardware error messages for ATA pass-thru devices
usb: renesas_usbhs: fix the BCLR setting condition for non-DCP pipe
usb: renesas_usbhs: fix usbhsf_fifo_clear() for RX direction
ALSA: usb-audio: Check out-of-bounds access by corrupted buffer descriptor
usb: pci-quirks.c: Corrected timeout values used in handshake
USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponse
USB: dummy-hcd: fix connection failures (wrong speed)
USB: dummy-hcd: fix infinite-loop resubmission bug
USB: dummy-hcd: Fix erroneous synchronization change
USB: devio: Don't corrupt user memory
usb: gadget: mass_storage: set msg_registered after msg registered
USB: g_mass_storage: Fix deadlock when driver is unbound
USB: uas: fix bug in handling of alternate settings
USB: core: harden cdc_parse_cdc_header
usb: Increase quirk delay for USB devices
USB: fix out-of-bounds in usb_set_configuration
xhci: fix finding correct bus_state structure for USB 3.1 hosts
xhci: Fix sleeping with spin_lock_irq() held in ASmedia 1042A workaround
xhci: set missing SuperSpeedPlus Link Protocol bit in roothub descriptor
Revert "xhci: Limit USB2 port wake support for AMD Promontory hosts"
iio: adc: twl4030: Fix an error handling path in 'twl4030_madc_probe()'
iio: adc: twl4030: Disable the vusb3v1 rugulator in the error handling path of 'twl4030_madc_probe()'
iio: ad_sigma_delta: Implement a dedicated reset function
staging: iio: ad7192: Fix - use the dedicated reset function avoiding dma from stack.
iio: core: Return error for failed read_reg
IIO: BME280: Updates to Humidity readings need ctrl_reg write!
iio: ad7793: Fix the serial interface reset
iio: adc: mcp320x: Fix readout of negative voltages
iio: adc: mcp320x: Fix oops on module unload
uwb: properly check kthread_run return value
uwb: ensure that endpoint is interrupt
staging: vchiq_2835_arm: Fix NULL ptr dereference in free_pagelist
mm, oom_reaper: skip mm structs with mmu notifiers
lib/ratelimit.c: use deferred printk() version
lsm: fix smack_inode_removexattr and xattr_getsecurity memleak
ALSA: compress: Remove unused variable
Revert "ALSA: echoaudio: purge contradictions between dimension matrix members and total number of members"
ALSA: usx2y: Suppress kernel warning at page allocation failures
mlxsw: spectrum: Prevent mirred-related crash on removal
net: sched: fix use-after-free in tcf_action_destroy and tcf_del_walker
sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
tcp: update skb->skb_mstamp more carefully
bpf/verifier: reject BPF_ALU64|BPF_END
tcp: fix data delivery rate
udpv6: Fix the checksum computation when HW checksum does not apply
ip6_gre: skb_push ipv6hdr before packing the header in ip6gre_header
net: phy: Fix mask value write on gmii2rgmii converter speed register
ip6_tunnel: do not allow loading ip6_tunnel if ipv6 is disabled in cmdline
net/sched: cls_matchall: fix crash when used with classful qdisc
tcp: fastopen: fix on syn-data transmit failure
net: emac: Fix napi poll list corruption
packet: hold bind lock when rebinding to fanout hook
bpf: one perf event close won't free bpf program attached by another perf event
isdn/i4l: fetch the ppp_write buffer in one shot
net_sched: always reset qdisc backlog in qdisc_reset()
net: qcom/emac: specify the correct size when mapping a DMA buffer
vti: fix use after free in vti_tunnel_xmit/vti6_tnl_xmit
l2tp: Avoid schedule while atomic in exit_net
l2tp: fix race condition in l2tp_tunnel_delete
tun: bail out from tun_get_user() if the skb is empty
net: dsa: Fix network device registration order
packet: in packet_do_bind, test fanout with bind_lock held
packet: only test po->has_vnet_hdr once in packet_snd
net: Set sk_prot_creator when cloning sockets to the right proto
netlink: do not proceed if dump's start() errs
ip6_gre: ip6gre_tap device should keep dst
ip6_tunnel: update mtu properly for ARPHRD_ETHER tunnel device in tx path
tipc: use only positive error codes in messages
net: rtnetlink: fix info leak in RTM_GETSTATS call
socket, bpf: fix possible use after free
powerpc/64s: Use emergency stack for kernel TM Bad Thing program checks
powerpc/tm: Fix illegal TM state in signal handler
percpu: make this_cpu_generic_read() atomic w.r.t. interrupts
driver core: platform: Don't read past the end of "driver_override" buffer
Drivers: hv: fcopy: restore correct transfer length
stm class: Fix a use-after-free
ftrace: Fix kmemleak in unregister_ftrace_graph
HID: i2c-hid: allocate hid buffers for real worst case
HID: wacom: leds: Don't try to control the EKR's read-only LEDs
HID: wacom: Always increment hdev refcount within wacom_get_hdev_data
HID: wacom: bits shifted too much for 9th and 10th buttons
rocker: fix rocker_tlv_put_* functions for KASAN
netlink: fix nla_put_{u8,u16,u32} for KASAN
iwlwifi: mvm: use IWL_HCMD_NOCOPY for MCAST_FILTER_CMD
iwlwifi: add workaround to disable wide channels in 5GHz
scsi: sd: Do not override max_sectors_kb sysfs setting
brcmfmac: add length check in brcmf_cfg80211_escan_handler()
brcmfmac: setup passive scan if requested by user-space
drm/i915/bios: ignore HDMI on port A
nvme-pci: Use PCI bus address for data/queues in CMB
mmc: core: add driver strength selection when selecting hs400es
sched/cpuset/pm: Fix cpuset vs. suspend-resume bugs
vfs: deny copy_file_range() for non regular files
ext4: fix data corruption for mmap writes
ext4: Don't clear SGID when inheriting ACLs
ext4: don't allow encrypted operations without keys
f2fs: don't allow encrypted operations without keys
KVM: x86: fix singlestepping over syscall
Linux 4.9.55
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 50e76632339d4655859523a39249dd95ee5e93e7 upstream.
Cpusets vs. suspend-resume is _completely_ broken. And it got noticed
because it now resulted in non-cpuset usage breaking too.
On suspend cpuset_cpu_inactive() doesn't call into
cpuset_update_active_cpus() because it doesn't want to move tasks about,
there is no need, all tasks are frozen and won't run again until after
we've resumed everything.
But this means that when we finally do call into
cpuset_update_active_cpus() after resuming the last frozen cpu in
cpuset_cpu_active(), the top_cpuset will not have any difference with
the cpu_active_mask and this it will not in fact do _anything_.
So the cpuset configuration will not be restored. This was largely
hidden because we would unconditionally create identity domains and
mobile users would not in fact use cpusets much. And servers what do use
cpusets tend to not suspend-resume much.
An addition problem is that we'd not in fact wait for the cpuset work to
finish before resuming the tasks, allowing spurious migrations outside
of the specified domains.
Fix the rebuild by introducing cpuset_force_rebuild() and fix the
ordering with cpuset_wait_for_hotplug().
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: deb7aa308e ("cpuset: reorganize CPU / memory hotplug handling")
Link: http://lkml.kernel.org/r/20170907091338.orwxrqkbfkki3c24@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.41
af_key: Add lock to key dump
pstore: Make spinlock per zone instead of global
net: reduce skb_warn_bad_offload() noise
jfs: Don't clear SGID when inheriting ACLs
ALSA: fm801: Initialize chip after IRQ handler is registered
ALSA: hda - Add missing NVIDIA GPU codec IDs to patch table
parisc: Prevent TLB speculation on flushed pages on CPUs that only support equivalent aliases
parisc: Extend disabled preemption in copy_user_page
parisc: Suspend lockup detectors before system halt
powerpc/pseries: Fix of_node_put() underflow during reconfig remove
NFS: invalidate file size when taking a lock.
NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter
crypto: authencesn - Fix digest_null crash
KVM: PPC: Book3S HV: Enable TM before accessing TM registers
md/raid5: add thread_group worker async_tx_issue_pending_all
drm/vmwgfx: Fix gcc-7.1.1 warning
drm/nouveau/disp/nv50-: bump max chans to 21
drm/nouveau/bar/gf100: fix access to upper half of BAR2
KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
KVM: PPC: Book3S HV: Save/restore host values of debug registers
Revert "powerpc/numa: Fix percpu allocations to be NUMA aware"
Staging: comedi: comedi_fops: Avoid orphaned proc entry
drm: rcar-du: Simplify and fix probe error handling
smp/hotplug: Move unparking of percpu threads to the control CPU
smp/hotplug: Replace BUG_ON and react useful
nfc: Fix hangup of RC-S380* in port100_send_ack()
nfc: fdp: fix NULL pointer dereference
net: phy: Do not perform software reset for Generic PHY
isdn: Fix a sleep-in-atomic bug
isdn/i4l: fix buffer overflow
ath10k: fix null deref on wmi-tlv when trying spectral scan
wil6210: fix deadlock when using fw_no_recovery option
mailbox: always wait in mbox_send_message for blocking Tx mode
mailbox: skip complete wait event if timer expired
mailbox: handle empty message in tx_tick
sched/cgroup: Move sched_online_group() back into css_online() to fix crash
RDMA/uverbs: Fix the check for port number
ipmi/watchdog: fix watchdog timeout set on reboot
dentry name snapshots
v4l: s5c73m3: fix negation operator
pstore: Allow prz to control need for locking
pstore: Correctly initialize spinlock and flags
pstore: Use dynamic spinlock initializer
net: skb_needs_check() accepts CHECKSUM_NONE for tx
device-dax: fix sysfs duplicate warnings
x86/mce/AMD: Make the init code more robust
r8169: add support for RTL8168 series add-on card.
ARM: omap2+: fixing wrong strcat for Non-NULL terminated string
dt-bindings: power/supply: Update TPS65217 properties
dt-bindings: input: Specify the interrupt number of TPS65217 power button
ARM: dts: am57xx-idk: Put USB2 port in peripheral mode
ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
net/mlx5: Disable RoCE on the e-switch management port under switchdev mode
ipv6: Should use consistent conditional judgement for ip6 fragment between __ip6_append_data and ip6_finish_output
net/mlx4_core: Use-after-free causes a resource leak in flow-steering detach
net/mlx4: Remove BUG_ON from ICM allocation routine
net/mlx4_core: Fix raw qp flow steering rules under SRIOV
drm/msm: Ensure that the hardware write pointer is valid
drm/msm: Put back the vaddr in submit_reloc()
drm/msm: Verify that MSM_SUBMIT_BO_FLAGS are set
vfio-pci: use 32-bit comparisons for register address for gcc-4.5
irqchip/keystone: Fix "scheduling while atomic" on rt
ASoC: tlv320aic3x: Mark the RESET register as volatile
spi: dw: Make debugfs name unique between instances
ASoC: nau8825: fix invalid configuration in Pre-Scalar of FLL
irqchip/mxs: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
openrisc: Add _text symbol to fix ksym build error
dmaengine: ioatdma: Add Skylake PCI Dev ID
dmaengine: ioatdma: workaround SKX ioatdma version
l2tp: consider '::' as wildcard address in l2tp_ip6 socket lookup
dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path.
usb: dwc3: omap: fix race of pm runtime with irq handler in probe
ARM64: zynqmp: Fix W=1 dtc 1.4 warnings
ARM64: zynqmp: Fix i2c node's compatible string
perf probe: Fix to get correct modname from elf header
ARM: s3c2410_defconfig: Fix invalid values for NF_CT_PROTO_*
ACPI / scan: Prefer devices without _HID/_CID for _ADR matching
usb: gadget: Fix copy/pasted error message
Btrfs: use down_read_nested to make lockdep silent
Btrfs: fix lockdep warning about log_mutex
benet: stricter vxlan offloading check in be_features_check
Btrfs: adjust outstanding_extents counter properly when dio write is split
Xen: ARM: Zero reserved fields of xatp before making hypervisor call
tools lib traceevent: Fix prev/next_prio for deadline tasks
xfrm: Don't use sk_family for socket policy lookups
perf tools: Install tools/lib/traceevent plugins with install-bin
perf symbols: Robustify reading of build-id from sysfs
video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
vfio-pci: Handle error from pci_iomap
arm64: mm: fix show_pte KERN_CONT fallout
nvmem: imx-ocotp: Fix wrong register size
net: usb: asix_devices: add .reset_resume for USB PM
ASoC: fsl_ssi: set fifo watermark to more reliable value
sh_eth: enable RX descriptor word 0 shift on SH7734
ARCv2: IRQ: Call entry/exit functions for chained handlers in MCIP
ALSA: usb-audio: test EP_FLAG_RUNNING at urb completion
x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev'
perf/x86: Set pmu->module in Intel PMU modules
ASoC: Intel: bytcr-rt5640: fix settings in internal clock mode
HID: ignore Petzl USB headlamp
scsi: fnic: Avoid sending reset to firmware when another reset is in progress
scsi: snic: Return error code on memory allocation failure
scsi: bfa: Increase requested firmware version to 3.2.5.1
ASoC: Intel: Skylake: Release FW ctx in cleanup
ASoC: dpcm: Avoid putting stream state to STOP when FE stream is paused
Linux 4.9.41
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 96b777452d8881480fd5be50112f791c17db4b6b upstream.
Commit:
2f5177f0fd ("sched/cgroup: Fix/cleanup cgroup teardown/init")
.. moved sched_online_group() from css_online() to css_alloc().
It exposes half-baked task group into global lists before initializing
generic cgroup stuff.
LTP testcase (third in cgroup_regression_test) written for testing
similar race in kernels 2.6.26-2.6.28 easily triggers this oops:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: kernfs_path_from_node_locked+0x260/0x320
CPU: 1 PID: 30346 Comm: cat Not tainted 4.10.0-rc5-test #4
Call Trace:
? kernfs_path_from_node+0x4f/0x60
kernfs_path_from_node+0x3e/0x60
print_rt_rq+0x44/0x2b0
print_rt_stats+0x7a/0xd0
print_cpu+0x2fc/0xe80
? __might_sleep+0x4a/0x80
sched_debug_show+0x17/0x30
seq_read+0xf2/0x3b0
proc_reg_read+0x42/0x70
__vfs_read+0x28/0x130
? security_file_permission+0x9b/0xc0
? rw_verify_area+0x4e/0xb0
vfs_read+0xa5/0x170
SyS_read+0x46/0xa0
entry_SYSCALL_64_fastpath+0x1e/0xad
Here the task group is already linked into the global RCU-protected 'task_groups'
list, but the css->cgroup pointer is still NULL.
This patch reverts this chunk and moves online back to css_online().
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 2f5177f0fd ("sched/cgroup: Fix/cleanup cgroup teardown/init")
Link: http://lkml.kernel.org/r/148655324740.424917.5302984537258726349.stgit@buzz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For Energy-Aware Scheduling (EAS) to work properly, even in the
case that there is only one cpu per cluster or that cpus are hot-plugged
out, the Energy Model (EM) data on all energy-aware sched domains (sd)
has to be present for all online cpus.
Mainline sd hierarchy setup code will remove sd's which are not useful
for task scheduling e.g. in the following situations:
1. Only 1 cpu is/remains in one cluster of a multi cluster system.
This remaining cpu only has DIE and no MC sd.
2. A complete cluster in a two cluster system is hot-plugged out.
The cpus of the remaining cluster only have MC and no DIE sd.
To make sure that all online cpus keep all their energy-aware sd's,
the sd degenerate functionality has been changed to not free a sd if
its first sched group (sg) contains EM data in case:
1. There is only 1 cpu left in the sd.
2. There have to be at least 2 sg's if certain sd flags are set.
Instead of freeing such a sd it now clears only its SD_LOAD_BALANCE
flag. This will make sure that the EAS functionality will always see
all energy-aware sd's for all online cpus.
It will introduce a tiny performance degradation for operations on
affected cpus since the hot-path macro for_each_domain() has to deal
with sd's not contributing to task scheduling at all now.
In most cases the exisiting code makes sure that task scheduling is not
invoked on a sd with !SD_LOAD_BALANCE.
However, a small change is necessary in update_sd_lb_stats() to make
sure that sd->parent is only initialized to !NULL in case the parent sd
contains more than 1 sg.
The handling of newidle decay values before the SD_LOAD_BALANCE check in
rebalance_domains() stays unchanged.
Test (w/ CONFIG_SCHED_DEBUG):
JUNO r0 default system:
$ cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03
CPU part : 0xd07
CPU part : 0xd07
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
SD names and flags:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name
MC
DIE
MC
DIE
MC
DIE
MC
DIE
MC
DIE
MC
DIE
$ printf "%x\n" `cat /proc/sys/kernel/sched_domain/cpu*/domain*/flags`
832f
102f
832f
102f
832f
102f
832f
102f
832f
102f
832f
102f
Test 1: Hotplug-out one A57 (CPU part 0xd07) cpu:
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03
CPU part : 0xd07
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
SD names and flags for remaining A57 (cpu2) cpu:
$ cat /proc/sys/kernel/sched_domain/cpu2/domain*/name
MC
DIE
$ printf "%x\n" `cat /proc/sys/kernel/sched_domain/cpu2/domain*/flags`
832e <-- MC SD with !SD_LOAD_BALANCE
102f
Test 2: Hotplug-out the entire A57 cluster:
$ echo 0 > /sys/devices/system/cpu/cpu1/online
$ echo 0 > /sys/devices/system/cpu/cpu2/online
$ cat /proc/cpuinfo | grep "^CPU part"
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
CPU part : 0xd03
SD names and flags for the remaining A53 (CPU part 0xd03) cluster:
$ cat /proc/sys/kernel/sched_domain/cpu*/domain*/name
MC
DIE
MC
DIE
MC
DIE
MC
DIE
$ printf "%x\n" `cat /proc/sys/kernel/sched_domain/cpu*/domain*/flags`
832f
102e <-- DIE SD with !SD_LOAD_BALANCE
832f
102e
832f
102e
832f
102e
Change-Id: If24aa2b2628f334abbf0207d39e2a86168d9d673
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
When a task moves from/to a cfs_rq, we set a flag which is then used to
propagate the change at parent level (sched_entity and cfs_rq) during
next update. If the cfs_rq is throttled, the flag will stay pending until
the cfs_rq is unthrottled.
For propagating the utilization, we copy the utilization of group cfs_rq to
the sched_entity.
For propagating the load, we have to take into account the load of the
whole task group in order to evaluate the load of the sched_entity.
Similarly to what was done before the rewrite of PELT, we add a correction
factor in case the task group's load is greater than its share so it will
contribute the same load of a task of equal weight.
Change-Id: I0aeaed29bb880c91d10df82c38ac9fc681de4f76
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten.Rasmussen@arm.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bsegall@google.com
Cc: kernellwp@gmail.com
Cc: pjt@google.com
Cc: yuyang.du@intel.com
Link: http://lkml.kernel.org/r/1478598827-32372-5-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
(cherry picked from commit 09a43ace1f986b003c118fdf6ddf1fd685692d49)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
This will allow to start iterating from a cpu with max or min original
capacity in the wakeup path regardless on which cpu the scheduler is
currently running (smp_processor_id()) or the previous cpu of the task
(task_cpu(p)). This iteration has to happen on a sched_domain spanning
all cpus in the order of the sched_groups of this sched_domain seen by
the starting cpu.
In case of an SMP system the first cpu with max orig capacity and the
the one with min orig capacity is the same. This can temporally happen
on a big.LITTLE system with hotplug as well.
E.g. the different order of cpu iteration can be used to map schedtune
task parameter 'boosted' into the cpu iteration order in
find_best_target().
Use of READ_ONCE()/WRITE_ONCE() to avoid load/store tearing.
Change-Id: I812fbd9c7e5f506617e456c0eec3edcd2c016e92
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
(cherry picked from commit fd6e9543c1fd8971a5e2e68e39b2f6e591d46114)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Commit fd5c98da1a42 "WIP: sched: Store system-wide maximum cpu capacity
in root domain" was repalced by commit 8148bdfff4f5 "WIP: sched: Update
max cpu capacity in case of max frequency constraints" which didn't
remove all the now unused bits.
Change-Id: I067f6366431f43337cffa7a2a8e0de32dd33d2f9
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
(cherry picked from commit 6d284a607cec51bcafca313bc396bc3103b1e876)
Signed-off-by: Chris Redpath <chris.redpath@arm.com>
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Changes in 4.9.39
xen-netfront: Rework the fix for Rx stall during OOM and network stress
net_sched: fix error recovery at qdisc creation
net: sched: Fix one possible panic when no destroy callback
net/phy: micrel: configure intterupts after autoneg workaround
ipv6: avoid unregistering inet6_dev for loopback
net: dp83640: Avoid NULL pointer dereference.
tcp: reset sk_rx_dst in tcp_disconnect()
net: prevent sign extension in dev_get_stats()
bridge: mdb: fix leak on complete_info ptr on fail path
rocker: move dereference before free
bpf: prevent leaking pointer via xadd on unpriviledged
net: handle NAPI_GRO_FREE_STOLEN_HEAD case also in napi_frags_finish()
net/mlx5: Cancel delayed recovery work when unloading the driver
liquidio: fix bug in soft reset failure detection
net/mlx5e: Fix TX carrier errors report in get stats ndo
ipv6: dad: don't remove dynamic addresses if link is down
vxlan: fix hlist corruption
net: core: Fix slab-out-of-bounds in netdev_stats_to_stats64
net: ipv6: Compare lwstate in detecting duplicate nexthops
vrf: fix bug_on triggered by rx when destroying a vrf
rds: tcp: use sock_create_lite() to create the accept socket
brcmfmac: fix possible buffer overflow in brcmf_cfg80211_mgmt_tx()
brcmfmac: Fix a memory leak in error handling path in 'brcmf_cfg80211_attach'
brcmfmac: Fix glom_skb leak in brcmf_sdiod_recv_chain
sfc: don't read beyond unicast address list
cfg80211: Define nla_policy for NL80211_ATTR_LOCAL_MESH_POWER_MODE
cfg80211: Validate frequencies nested in NL80211_ATTR_SCAN_FREQUENCIES
cfg80211: Check if PMKID attribute is of expected size
cfg80211: Check if NAN service ID is of expected size
irqchip/gic-v3: Fix out-of-bound access in gic_set_affinity
parisc: Report SIGSEGV instead of SIGBUS when running out of stack
parisc: use compat_sys_keyctl()
parisc: DMA API: return error instead of BUG_ON for dma ops on non dma devs
parisc/mm: Ensure IRQs are off in switch_mm()
tools/lib/lockdep: Reduce MAX_LOCK_DEPTH to avoid overflowing lock_chain/: Depth
thp, mm: fix crash due race in MADV_FREE handling
kernel/extable.c: mark core_kernel_text notrace
mm/list_lru.c: fix list_lru_count_node() to be race free
fs/dcache.c: fix spin lockup issue on nlru->lock
checkpatch: silence perl 5.26.0 unescaped left brace warnings
binfmt_elf: use ELF_ET_DYN_BASE only for PIE
arm: move ELF_ET_DYN_BASE to 4MB
arm64: move ELF_ET_DYN_BASE to 4GB / 4MB
powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB
s390: reduce ELF_ET_DYN_BASE
exec: Limit arg stack to at most 75% of _STK_LIM
ARM64: dts: marvell: armada37xx: Fix timer interrupt specifiers
vt: fix unchecked __put_user() in tioclinux ioctls
rcu: Add memory barriers for NOCB leader wakeup
nvmem: core: fix leaks on registration errors
mnt: In umount propagation reparent in a separate pass
mnt: In propgate_umount handle visiting mounts in any order
mnt: Make propagate_umount less slow for overlapping mount propagation trees
selftests/capabilities: Fix the test_execve test
mm: fix overflow check in expand_upwards()
crypto: talitos - Extend max key length for SHA384/512-HMAC and AEAD
crypto: atmel - only treat EBUSY as transient if backlog
crypto: sha1-ssse3 - Disable avx2
crypto: caam - properly set IV after {en,de}crypt
crypto: caam - fix signals handling
Revert "sched/core: Optimize SCHED_SMT"
sched/fair, cpumask: Export for_each_cpu_wrap()
sched/topology: Fix building of overlapping sched-groups
sched/topology: Optimize build_group_mask()
sched/topology: Fix overlapping sched_group_mask
PM / wakeirq: Convert to SRCU
PM / QoS: return -EINVAL for bogus strings
tracing: Use SOFTIRQ_OFFSET for softirq dectection for more accurate results
kvm: vmx: Do not disable intercepts for BNDCFGS
kvm: x86: Guest BNDCFGS requires guest MPX support
kvm: vmx: Check value written to IA32_BNDCFGS
kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
4.9.39
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 73bb059f9b8a00c5e1bf2f7ca83138c05d05e600 upstream.
The point of sched_group_mask is to select those CPUs from
sched_group_cpus that can actually arrive at this balance domain.
The current code gets it wrong, as can be readily demonstrated with a
topology like:
node 0 1 2 3
0: 10 20 30 20
1: 20 10 20 30
2: 30 20 10 20
3: 20 30 20 10
Where (for example) domain 1 on CPU1 ends up with a mask that includes
CPU0:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 0-2) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
This causes sched_balance_cpu() to compute the wrong CPU and
consequently should_we_balance() will terminate early resulting in
missed load-balance opportunities.
The fixed topology looks like:
[] CPU1 attaching sched-domain:
[] domain 0: span 0-2 level NUMA
[] groups: 1 (mask: 1), 2, 0
[] domain 1: span 0-3 level NUMA
[] groups: 0-2 (mask: 1) (cpu_capacity: 3072), 0,2-3 (cpu_capacity: 3072)
(note: this relies on OVERLAP domains to always have children, this is
true because the regular topology domains are still here -- this is
before degenerate trimming)
Debugged-by: Lauro Ramos Venancio <lvenanci@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Fixes: e3589f6c81 ("sched: Allow for overlapping sched_domain spans")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1b568f0aab.
For the 4.9 kernel tree, this patch causes scheduler regressions. It is
fixed in newer kernels with a large number of individual patches, the
sum of which is too big for the stable kernel tree.
Ingo recommended just reverting the single patch for this tree, as it's
much simpler.
Reported-by: Ben Guthro <ben@guthro.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.9.34
fs: pass on flags in compat_writev
configfs: Fix race between create_link and configfs_rmdir
can: gs_usb: fix memory leak in gs_cmd_reset()
ila_xlat: add missing hash secret initialization
cpufreq: conservative: Allow down_threshold to take values from 1 to 10
vb2: Fix an off by one error in 'vb2_plane_vaddr'
mac80211: don't look at the PM bit of BAR frames
mac80211/wpa: use constant time memory comparison for MACs
drm/amdgpu: Fix overflow of watermark calcs at > 4k resolutions.
drm/i915: Fix GVT-g PVINFO version compatibility check
usb: musb: dsps: keep VBUS on for host-only mode
mac80211: fix CSA in IBSS mode
mac80211: fix packet statistics for fast-RX
mac80211: fix IBSS presp allocation size
mac80211: strictly check mesh address extension mode
mac80211: fix dropped counter in multiqueue RX
mac80211: don't send SMPS action frame in AP mode when not needed
drm/mediatek: fix mtk_hdmi_setup_vendor_specific_infoframe mistake
drm/vc4: Fix OOPSes from trying to cache a partially constructed BO.
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
serial: sh-sci: Fix late enablement of AUTORTS
x86/mm/32: Set the '__vmalloc_start_set' flag in initmem_init()
mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode
staging: rtl8188eu: prevent an underflow in rtw_check_beacon_data()
staging: iio: tsl2x7x_core: Fix standard deviation calculation
iio: st_pressure: Fix data sign
iio: proximity: as3935: recalibrate RCO after resume
iio: adc: ti_am335x_adc: allocating too much in probe
IB/mlx5: Fix kernel to user leak prevention logic
usb: gadget: udc: renesas_usb3: fix pm_runtime functions calling
usb: gadget: udc: renesas_usb3: fix deadlock by spinlock
usb: gadget: udc: renesas_usb3: lock for PN_ registers access
USB: hub: fix SS max number of ports
usb: core: fix potential memory leak in error path during hcd creation
USB: usbip: fix nonconforming hub descriptor
pvrusb2: reduce stack usage pvr2_eeprom_analyze()
USB: gadget: dummy_hcd: fix hub-descriptor removable fields
usb: r8a66597-hcd: select a different endpoint on timeout
usb: r8a66597-hcd: decrease timeout
ath10k: fix napi crash during rmmod when probe firmware fails
misc: mic: double free on ioctl error path
drivers/misc/c2port/c2port-duramar2150.c: checking for NULL instead of IS_ERR()
usb: xhci: Fix USB 3.1 supported protocol parsing
usb: xhci: ASMedia ASM1042A chipset need shorts TX quirk
USB: gadget: fix GPF in gadgetfs
USB: gadgetfs, dummy-hcd, net2280: fix locking for callbacks
mm/memory-failure.c: use compound_head() flags for huge pages
swap: cond_resched in swap_cgroup_prepare()
iio: imu: inv_mpu6050: add accel lpf setting for chip >= MPU6500
sched/core: Idle_task_exit() shouldn't use switch_mm_irqs_off()
genirq: Release resources in __setup_irq() error path
alarmtimer: Prevent overflow of relative timers
usb: gadget: composite: Fix function used to free memory
usb: dwc3: exynos fix axius clock error path to do cleanup
MIPS: Fix bnezc/jialc return address calculation
MIPS: .its targets depend on vmlinux
vTPM: Fix missing NULL check
crypto: Work around deallocated stack frame reference gcc bug on sparc.
alarmtimer: Rate limit periodic intervals
mm: larger stack guard gap, between vmas
Allow stack to grow up to address space limit
mm: fix new crash in unmapped_area_topdown()
Linux 4.9.34
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 252d2a4117bc181b287eeddf848863788da733ae upstream.
idle_task_exit() can be called with IRQs on x86 on and therefore
should use switch_mm(), not switch_mm_irqs_off().
This doesn't seem to cause any problems right now, but it will
confuse my upcoming TLB flush changes. Nonetheless, I think it
should be backported because it's trivial. There won't be any
meaningful performance impact because idle_task_exit() is only
used when offlining a CPU.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f98db6013c ("sched/core: Add switch_mm_irqs_off() and use it in the scheduler")
Link: http://lkml.kernel.org/r/ca3d1a9fa93a0b49f5a8ff729eda3640fb6abdf9.1497034141.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26c2154816 ("ANDROID: sched: Introduce Window Assisted Load
Tracking (WALT)") which was a forward port of WALT from android 4.4
missed locking for 2 set_task_cpu() calls, re-added here.
Signed-off-by: Andres Oportus <andresoportus@google.com>
The current kernel allows to use either PELT or WALT to track CPUs utilizations.
One of the main differences between the two approaches is that PELT
tracks only utilization of SCHED_OTHER classes while WALT tracks all tasks
with a single signal.
The current sched_freq_tick does not make this distinction and, when WALT
is in use, we end up adding multiple time the contribution related to
the RT and DL classes. This patch fixes this issue by:
1. providing two different code paths for PELT and WALT, thus granting that
when we switch to PELT we get the original behaviour based on the assumption
that class aggregations is done underneath by SchedFreq.
2. avoiding the double accounting of DL and RT workloads, when WALT is in use,
by just adding a margin to the original WALT signal when we need to check
if the CFS capacity has to be increased.
Change-Id: I7326fd50e868e97fb5e12351917e9d2969bfdae7
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
During scheduler tick handling, the frequency was being set to
max-freq if the current frequency is less than the current
utilization. Change to just request "right" frequency instead
of max.
BUG: 29871410
Change-Id: I6fe65b14413da44b1520ba116f72320083eb92f8
Signed-off-by: Andres Oportus <andresoportus@google.com>
Schedules on a core whose irq count is less than a threshold.
Improves I/O performance of EAS.
Change-Id: I08ff7dd0d22502a0106fc636b1af2e6fe9e758b5
Signed-off-by: Andres Oportus <andresoportus@google.com>
use a window based view of time in order to track task
demand and CPU utilization in the scheduler.
Window Assisted Load Tracking (WALT) implementation credits:
Srivatsa Vaddagiri, Steve Muckle, Syed Rameez Mustafa, Joonwoo Park,
Pavan Kumar Kondeti, Olav Haugan
2016-03-06: Integration with EAS/refactoring by Vikram Mulukutla
and Todd Kjos
Change-Id: I21408236836625d4e7d7de1843d20ed5ff36c708
Includes fixes for issues:
eas/walt: Use walt_ktime_clock() instead of ktime_get_ns() to avoid a
race resulting in watchdog resets
BUG: 29353986
Change-Id: Ic1820e22a136f7c7ebd6f42e15f14d470f6bbbdb
Handle walt accounting anomoly during resume
During resume, there is a corner case where on wakeup, a task's
prev_runnable_sum can go negative. This is a workaround that
fixes the condition and warns (instead of crashing).
BUG: 29464099
Change-Id: I173e7874324b31a3584435530281708145773508
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
[jstultz: fwdported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Contains:
sched/tune: fix accounting for runnable tasks (1/5)
The accounting for tasks into boost groups of different CPUs is currently
broken mainly because:
a) we do not properly track the change of boost group of a RUNNABLE task
b) there are race conditions between migration code and accounting code
This patch provides a fixes to ensure enqueue/dequeue
accounting also for throttled tasks.
Without this patch is can happen that a task is enqueued into a throttled
RQ thus not being accounted for the boosting of the corresponding RQ.
We could argue that a throttled task should not boost a CPU, however:
a) properly implementing CPU boosting considering throttled tasks will
increase a lot the complexity of the solution
b) it's not easy to quantify the benefits introduced by such a more
complex solution
Since task throttling requires the usage of the CFS bandwidth controller,
which is not widely used on mobile systems (at least not by Android kernels
so far), for the time being we go for the simple solution and boost also
for throttled RQs.
sched/tune: fix accounting for runnable tasks (2/5)
This patch provides the code required to enforce proper locking.
A per boost group spinlock has been added to grant atomic
accounting of tasks as well as to serialise enqueue/dequeue operations,
triggered by tasks migrations, with cgroups's attach/detach operations.
sched/tune: fix accounting for runnable tasks (3/5)
This patch adds cgroups {allow,can,cancel}_attach callbacks.
Since a task can be migrated between boost groups while it's running,
the CGroups's attach callbacks have been added to properly migrate
boost contributions of RUNNABLE tasks.
The RQ's lock is used to serialise enqueue/dequeue operations, triggered
by tasks migrations, with cgroups's attach/detach operations. While the
SchedTune's CPU lock is used to grant atrocity of the accounting within
the CPU.
NOTE: the current implementation does not allows a concurrent CPU migration
and CGroups change.
sched/tune: fix accounting for runnable tasks (4/5)
This fixes accounting for exiting tasks by adding a dedicated call early
in the do_exit() syscall, which disables SchedTune accounting as soon as a
task is flagged PF_EXITING.
This flag is set before the multiple dequeue/enqueue dance triggered
by cgroup_exit() which is useful only to inject useless tasks movements
thus increasing possibilities for race conditions with the migration code.
The schedtune_exit_task() call does the last dequeue of a task from its
current boost group. This is a solution more aligned with what happens in
mainline kernels (>v4.4) where the exit_cgroup does not move anymore a dying
task to the root control group.
sched/tune: fix accounting for runnable tasks (5/5)
To avoid accounting issues at startup, this patch disable the SchedTune
accounting until the required data structures have been properly
initialized.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
[jstultz: fwdported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Doing a Exponential moving average per nr_running++/-- does not
guarantee a fixed sample rate which induces errors if there are lots of
threads being enqueued/dequeued from the rq (Linpack mt). Instead of
keeping track of the avg, the scheduler now keeps track of the integral
of nr_running and allows the readers to perform filtering on top.
Original-author: Sai Charan Gurrappadi <sgurrappadi@nvidia.com>
Change-Id: Id946654f32fa8be0eaf9d8fa7c9a8039b5ef9fab
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174694
Reviewed-on: https://chromium-review.googlesource.com/272853
[jstultz: fwdported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Since the true utilization of a long running task is not detectable
while it is running and might be bigger than the current cpu capacity,
create the maximum cpu capacity head room by requesting the maximum
cpu capacity once the cpu usage plus the capacity margin exceeds the
current capacity. This is also done to try to harm the performance of
a task the least.
Original fair-class only version authored by Juri Lelli
<juri.lelli@arm.com>.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Patch "sched/fair: add triggers for OPP change requests" introduced OPP
change triggers for enqueue_task_fair(), but the trigger was operating only
for wakeups. Fact is that it makes sense to consider wakeup_new also (i.e.,
fork()), as we don't know anything about a newly created task and thus we
most certainly want to jump to max OPP to not harm performance too much.
However, it is not currently possible (or at least it wasn't evident to me
how to do so :/) to tell new wakeups from other (non wakeup) operations.
This patch introduces an additional flag in sched.h that is only set at
fork() time and it is then consumed in enqueue_task_fair() for our purpose.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Signed-off-by: Andres Oportus <andresoportus@google.com>
struct sched_group_capacity currently represents the compute capacity
sum of all cpus in the sched_group. Unless it is divided by the
group_weight to get the average capacity per cpu it hides differences in
cpu capacity for mixed capacity systems (e.g. high RT/IRQ utilization or
ARM big.LITTLE). But even the average may not be sufficient if the group
covers cpus of different capacities. Instead, by extending struct
sched_group_capacity to indicate max per-cpu capacity in the group a
suitable group for a given task utilization can easily be found such
that cpus with reduced capacity can be avoided for tasks with high
utilization (not implemented by this patch).
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Wakeup balancing uses cpu capacity awareness and needs to know the
system-wide maximum cpu capacity.
Patch "sched: Store system-wide maximum cpu capacity in root domain"
finds the system-wide maximum cpu capacity during scheduler domain
hierarchy setup. This is sufficient as long as maximum frequency
invariance is not enabled.
If it is enabled, the system-wide maximum cpu capacity can change
between scheduler domain hierarchy setups due to frequency capping.
The cpu capacity is changed in update_cpu_capacity() which is called in
load balance on the lowest scheduler domain hierarchy level. To be able
to know if a change in cpu capacity for a certain cpu also has an effect
on the system-wide maximum cpu capacity it is normally necessary to
iterate over all cpus. This would be way too costly. That's why this
patch follows a different approach.
The unsigned long max_cpu_capacity value in struct root_domain is
replaced with a struct max_cpu_capacity, containing value (the
max_cpu_capacity) and cpu (the cpu index of the cpu providing the
maximum cpu_capacity).
Changes to the system-wide maximum cpu capacity and the cpu index are
made if:
1 System-wide maximum cpu capacity < cpu capacity
2 System-wide maximum cpu capacity > cpu capacity and cpu index == cpu
There are no changes to the system-wide maximum cpu capacity in all
other cases.
Atomic read and write access to the pair (max_cpu_capacity.val,
max_cpu_capacity.cpu) is enforced by max_cpu_capacity.lock.
The access to max_cpu_capacity.val in task_fits_max() is still performed
without taking the max_cpu_capacity.lock.
The code to set max cpu capacity in build_sched_domains() has been
removed because the whole functionality is now provided by
update_cpu_capacity() instead.
This approach can introduce errors temporarily, e.g. in case the cpu
currently providing the max cpu capacity has its cpu capacity lowered
due to frequency capping and calls update_cpu_capacity() before any cpu
which might provide the max cpu now.
There is also an outstanding question:
Should the cpu capacity of a cpu going idle be set to a very small
value?
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
For energy-aware load-balancing decisions it is necessary to know the
energy consumption estimates of groups of cpus. This patch introduces a
basic function, sched_group_energy(), which estimates the energy
consumption of the cpus in the group and any resources shared by the
members of the group.
NOTE: The function has five levels of identation and breaks the 80
character limit. Refactoring is necessary.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Add another member to the family of per-cpu sched_domain shortcut
pointers. This one, sd_ea, points to the highest level at which energy
model is provided. At this level and all levels below all sched_groups
have energy model data attached.
Partial energy model information is possible but restricted to providing
energy model data for lower level sched_domains (sd_ea and below) and
leaving load-balancing on levels above to non-energy-aware
load-balancing. For example, it is possible to apply energy-aware
scheduling within each socket on a multi-socket system and let normal
scheduling handle load-balancing between sockets.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
cpufreq is currently keeping it a secret which cpus are sharing
clock source. The scheduler needs to know about clock domains as well
to become more energy aware. The SD_SHARE_CAP_STATES domain flag
indicates whether cpus belonging to the sched_domain share capacity
states (P-states).
There is no connection with cpufreq (yet). The flag must be set by
the arch specific topology code.
cc: Russell King <linux@arm.linux.org.uk>
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Morten Rasmussen <morten.rasmussen@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
The sched_group_energy (sge) pointer of the first sched_group (sg) in
the sched_domain (sd) is initialized to point to the appropriate (in
terms of sd level and cpu) sge data defined in the arch and so to the
correct part of the Energy Model (EM).
Energy-aware scheduling allows that a system has only EM data up to a
certain sd level (so called highest energy aware balancing sd level).
A check in init_sched_energy() enforces that all sd's below this sd
level contain EM data.
The 'int cpu' parameter of sched_domain_energy_f requires that
check_sched_energy_data() makes sure that all cpus spanned by a sg
are provisioned with the same EM data.
This patch has also been tested with feature FORCE_SD_OVERLAP enabled.
cc: Ingo Molnar <mingo@redhat.com>
cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
The per-zone waitqueues exist because of a scalability issue with the
page waitqueues on some NUMA machines, but it turns out that they hurt
normal loads, and now with the vmalloced stacks they also end up
breaking gfs2 that uses a bit_wait on a stack object:
wait_on_bit(&gh->gh_iflags, HIF_WAIT, TASK_UNINTERRUPTIBLE)
where 'gh' can be a reference to the local variable 'mount_gh' on the
stack of fill_super().
The reason the per-zone hash table breaks for this case is that there is
no "zone" for virtual allocations, and trying to look up the physical
page to get at it will fail (with a BUG_ON()).
It turns out that I actually complained to the mm people about the
per-zone hash table for another reason just a month ago: the zone lookup
also hurts the regular use of "unlock_page()" a lot, because the zone
lookup ends up forcing several unnecessary cache misses and generates
horrible code.
As part of that earlier discussion, we had a much better solution for
the NUMA scalability issue - by just making the page lock have a
separate contention bit, the waitqueue doesn't even have to be looked at
for the normal case.
Peter Zijlstra already has a patch for that, but let's see if anybody
even notices. In the meantime, let's fix the actual gfs2 breakage by
simplifying the bitlock waitqueues and removing the per-zone issue.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull low-level x86 updates from Ingo Molnar:
"In this cycle this topic tree has become one of those 'super topics'
that accumulated a lot of changes:
- Add CONFIG_VMAP_STACK=y support to the core kernel and enable it on
x86 - preceded by an array of changes. v4.8 saw preparatory changes
in this area already - this is the rest of the work. Includes the
thread stack caching performance optimization. (Andy Lutomirski)
- switch_to() cleanups and all around enhancements. (Brian Gerst)
- A large number of dumpstack infrastructure enhancements and an
unwinder abstraction. The secret long term plan is safe(r) live
patching plus maybe another attempt at debuginfo based unwinding -
but all these current bits are standalone enhancements in a frame
pointer based debug environment as well. (Josh Poimboeuf)
- More __ro_after_init and const annotations. (Kees Cook)
- Enable KASLR for the vmemmap memory region. (Thomas Garnier)"
[ The virtually mapped stack changes are pretty fundamental, and not
x86-specific per se, even if they are only used on x86 right now. ]
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
x86/asm: Get rid of __read_cr4_safe()
thread_info: Use unsigned long for flags
x86/alternatives: Add stack frame dependency to alternative_call_2()
x86/dumpstack: Fix show_stack() task pointer regression
x86/dumpstack: Remove dump_trace() and related callbacks
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder
oprofile/x86: Convert x86_backtrace() to use the new unwinder
x86/stacktrace: Convert save_stack_trace_*() to use the new unwinder
perf/x86: Convert perf_callchain_kernel() to use the new unwinder
x86/unwind: Add new unwind interface and implementations
x86/dumpstack: Remove NULL task pointer convention
fork: Optimize task creation by caching two thread stacks per CPU if CONFIG_VMAP_STACK=y
sched/core: Free the stack early if CONFIG_THREAD_INFO_IN_TASK
lib/syscall: Pin the task stack in collect_syscall()
x86/process: Pin the target stack in get_wchan()
x86/dumpstack: Pin the target stack when dumping it
kthread: Pin the stack via try_get_task_stack()/put_task_stack() in to_live_kthread() function
sched/core: Add try_get_task_stack() and put_task_stack()
x86/entry/64: Fix a minor comment rebase error
iommu/amd: Don't put completion-wait semaphore on stack
...
Almost all scheduler functions update state with the following
pattern:
if (queued)
dequeue_task(rq, p, DEQUEUE_SAVE);
if (running)
put_prev_task(rq, p);
/* update state */
if (queued)
enqueue_task(rq, p, ENQUEUE_RESTORE);
if (running)
set_curr_task(rq, p);
set_user_nice() however misses the running part, cure this.
This was found by asserting we never enqueue 'current'.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra
Chris Redpath
Greg Kroah-Hartman
Wanpeng Li
Konstantin Khlebnikov
Andres Oportus
Dietmar Eggemann
Vincent Guittot
Morten Rasmussen
Lauro Ramos Venancio
Greg Kroah-Hartman
Andy Lutomirski
Juri Lelli
Patrick Bellasi
Todd Kjos
Srinath Sridharan
Srivatsa Vaddagiri
Joseph Lo
Steve Muckle
Arve Hjønnevåg
Linus Torvalds
Tetsuo Handa